Best place to set my hpf/lpf deck or amp
#1
Best place to set my hpf/lpf deck or amp
Where's the best place to set my filters? I've got a kenwood excelon deck, a JL hd600/4 on my speakers and a hd750/1 on my sub. Where would be most accurate? Deck or amps? Right now it's set on my amps and set to through on my deck. Let me know which is better and why. Thanks
#4
The slope on the amp will only be in effect if you are using the filter on the amp.
If you use the deck filters then it should have either fixed or adjustable slopes, check the user manual.
Typically, slope are set as follows.
For the sub: lpf - slope 24 or 18 db/octave (24 is more commonly used).
For the doors: hpf - slope 12 db/octave (most commonly used).
If you use the deck filters then it should have either fixed or adjustable slopes, check the user manual.
Typically, slope are set as follows.
For the sub: lpf - slope 24 or 18 db/octave (24 is more commonly used).
For the doors: hpf - slope 12 db/octave (most commonly used).
Thread
Thread Starter
Forum
Replies
Last Post
Scottie
General Discussion
10
07-16-2009 11:04 AM
GhettoStudMuffin
General SQ
1
04-23-2005 07:19 AM