General settings help * 3way
Here's my set up, I am wondering how you guys set the mid bass/ mid Crossover.
Focal K2P 6.5 mid bass, 4" mid, tweeter, 11"V2 Sub. Mid bass has seperate amp 120 watt per, mid/tweeter has 70 watt per. Joe |
Personally I like to run the mid as low as it will tolerate without getting honky or breaking up. Then I set the midbass in the same general area.
This tends to result in 150-400hz depending on the midrange. |
Originally Posted by Dukk
Personally I like to run the mid as low as it will tolerate without getting honky or breaking up. Then I set the midbass in the same general area.
This tends to result in 150-400hz depending on the midrange. If you can, do the same thing with your midbase to your sub, I would suggest a range of around 80 to > 150. |
what 4" mid is it ?
|
Originally Posted by zzzzzzz
what 4" mid is it ?
Joe |
the 165 can play 92-22khz the 100kp 120-22khz and there 52 will play what 1900hz 3-5khz or something like that
|
Originally Posted by AAAAAAA
X 2
If you can, do the same thing with your midbase to your sub, I would suggest a range of around 80 to > 150. Agreed. Smart guy. Uses Canton too :smilie_da :smilie_da :appl: |
Originally Posted by Dukk
Agreed. Smart guy. Uses Canton too :smilie_da :smilie_da :appl:
Can one of you guy's clarify the frequency ranges that the sub, mid bass,and mid/tweet should cover individually? Joe |
All times are GMT -5. The time now is 09:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands