i am interested to know if anyone has had any success building a bridge to suspend a tweeter over a midrange similar to the cdt audio, mb quart idea. i am thinking about building a partial bridge not a full bridge, i am concerned about the tweeter not having a proper baffle to mount to, any input would be great

The less baffle a tweeter has the better actually. Beware the dreaded 'edge diffraction' :eek:

Make sure your bridge is rigid enough to support the tweet and can hide the wires and you are set.

Another idea would be to cut a hole in the supplied grill, and pop the tweet in there, somemanufacturers do this for you.

also remember this. all the quart bridges i have seen, have a bit it an incline, especially the 6.5 due to the fact that you might have a good amount of excursion. if it's too low then you'll damage your dustcap. fyi

i used something on the lines of plumbers strap on my old set up... it was like it but a lot more rigid... work fairly well...