I wanna take my amp outta my Accord and put it in my Integra...anyone know how to take it out and then connect it to the Integra...btw my amp is a Rockford Fosgate Punch 300S...

steps or diagrams would be helpful...even sites

thanks....

 

do you already have the wires run in the integra? if so, then you would make sure to take the fuse from the power wire out (near the battery usually), then disconnect all the wires from the amp and put it in the integra. If not, you're going to need an amp install kit for the integra.

 

I don't actually have the wires in the Integra...can't I use the same wires that is in my Honda?

whats the difference?

 

Does the honda have an amp install kit in it already? or did you somehow use the factory wires that were in the integra just take out the fuse up front and disconnect the amp, tell us some more info and we can help you better [img]smile.gif[/img]

 

You can use the same wires, you didn't specify in the first post so i had to ask. I just hope you have some slack, i'm not sure if the lengths are going to be the exact same for each car.

 

sorry, ya u can use the same wires providing the length is good. So basically what he said^^^

 

wires should be fine, just wasn't mentioned in the first post so wasn't sure if you had any or were going to take them out of the accord.