cut outs??
Thread Starter
0 Watt CAFz'r
Joined: Jun 2003
Posts: 9
hey guys.. i got a lil problem here... im running 2 12" pioneer spl subs 2000max. i have the alpine mrv-1507 amp running them. i wired everything up into 4 ohm my gain is at 1/4 and it keeps cutting out and then coming back on.. any ideas?
Thread Starter
0 Watt CAFz'r
Joined: Jun 2003
Posts: 9
i sold the 2 jl's.. anyways the protection light comes on and blinks red till it kicks back.. during thbis the subs make a wierd bumping sound.. i am running 4 gauge power wire.. i have a cap as well and i just cant seem to think what is wrong..
Guest
Posts: n/a
http://www.jlaudio.com/tutorials/wiring/index.html
make sure the subs are wired right ........check and double check all wiring .make sure nothings shorted out
try each sub one at a time off the amp (wired to 8 ohms)
if that all fails ........I say bad amp .....those 1507's are known for poor reliabilty [img]smile.gif[/img]
make sure the subs are wired right ........check and double check all wiring .make sure nothings shorted out
try each sub one at a time off the amp (wired to 8 ohms)
if that all fails ........I say bad amp .....those 1507's are known for poor reliabilty [img]smile.gif[/img]
500 Watt CAFz'r
Joined: Jul 2002
Posts: 548
Originally posted by dodgeram:
if that all fails ........I say bad amp .....those 1507's are known for poor reliabilty [img]smile.gif[/img]
if that all fails ........I say bad amp .....those 1507's are known for poor reliabilty [img]smile.gif[/img]
Equipment superior to operator.
