fiberglass: How To
07-29-2003, 04:09 AM
#1
50 Watt CAFz'r
Thread Starter
Join Date: Jul 2003
Posts: 75
Can anybody tell me or tell me a good website for step by step on how to make fiberglassed kickpanels? I drive a saturn and to my knowledge they dont have kick panels u can buy for them, so im looking to make my own. thanks
07-29-2003, 10:48 AM
#2
Guest
Posts: n/a
08-02-2003, 12:47 AM
#3
50 Watt CAFz'r
Join Date: Apr 2003
Posts: 77
http://chris.pfharlock.com/glass/index.htm
http://web.njit.edu/~cas1383/glassing2/
these are what i used, actually i didn't see the first until after i was well underway, but both have good tips and the general idea of what you need to do
http://web.njit.edu/~cas1383/glassing2/
these are what i used, actually i didn't see the first until after i was well underway, but both have good tips and the general idea of what you need to do
08-05-2003, 03:29 PM
#5
Guest
Posts: n/a
The foil doesn't like to conform to odd curves all that well. The tape will stick to any contours and then I like to use a little bit of spray glue where needed to stick the aluminum foil to the tape.
99% of the time I just use tape and then use foil for large areas.
99% of the time I just use tape and then use foil for large areas.
08-07-2003, 08:24 AM
#6
1000 Watt CAFz'r
Join Date: May 2002
Posts: 1,649
Just remember that when fibreglass cures, depending on how you mixed it, it generates some heat. If you're glassing over carpet that you have taped up, the fibreglass curing may turn the tape into a gooey mess. Getting that junk out of your carpet or cloth can be painful.
Thread
Thread Starter
Forum
Replies
Last Post
