hey guys i jsut picked up a bmw 540, and it has 4 tvs, in it, 3 subs, all teh good stuff

but the system is not turing on because its goign throught a phonix gold Ti DEG comp

and its not turnign on, i need somone to help me getign runing will obviosly pay where required [img]smile.gif[/img]

teh amps turn on, when i trigger the remotes, so i know it turns on, jsut the DEQ wont turn on,
thanx
please pm asap!

mi ont usre hwat oyur saknig

HAHAHAHAHAHAHHAHA,
i wrote that msg, 2 hours after getting my wisdom teeth taken out and typing as fast as i could before i puked.

basically, i just bought a new car
it has alot of cool toys, and the system is a little more complicated then your avg system.
it has a panasonic 7 inch head unit, and 3 tvs (monitors) in the rear. also has 2 amps (1 mono block, and 1 4 ch), and focal comp sets all around.
but goes through a phonix gold Ti COmp DEQ

when i turn the car on, no sound. so i check the truck and none of the amps turn on, so i use my test lamp, and see that teh trigger wire on teh amps are dead.

(to check and see if it works, i gave 12v, and they turn on, but still no sound)

i look over at teh DEQ, and realize it doesnt turn on. SO i try to play around with it, and ge tit on, but STILL NO music, when i turned it on, the amps turn on, so im guessign teh trigger (remote) is all run through the DEQ.

THE DEQ, has a little comand thing, that you can set the type of music, or what not, it has an SPL, or SQ, and 2 other modes on it. BUT THAT doesnt turn on, so i think the DEQ, is my major problem.
NOW i wanted to know IF ANYONE could help me fix this problem, or is familar with this equipment,
ill be in 401\keele area tom, so i would liek to get it up and running asap.

please pm ME, and i hope this is better than the 1st attempt LOL
thanx