|
My install in my 2013 VW CC r-line
3 Attachment(s)
I will update this thread as I make progress. At this point I have made enough progress to start the thread and have it be somewhat interesting.
So far here is what I am using: Source unit: Factory RNS-315 touchscreen navigation with Satellite radio Processor: JL audio cleansweep factory radio integration DSP Amplifier: McIntosh MC-440 6 channel amplifier (50x4 + 100x2) running bridged (200x2 + 400x1) Components: Dynaudio System 360 (8" mid, 3" mid, 1" tweeter) I sold the 8 and got 6.5 mids to better fit the doors. Wiring: Knuconceptz power/ground, Phoenix gold speaker wire, Monster XLNPRO RCAs. the loot: https://www.caraudioforumz.com/attac...ine=1368969344 Amp location (under the rear deck). i have never seen such a large area like this in a car. https://www.caraudioforumz.com/attac...ine=1368969344 https://www.caraudioforumz.com/attac...ine=1368969344 |
6 Attachment(s)
passenger side door speaker install:
https://www.caraudioforumz.com/attac...ine=1368969606 https://www.caraudioforumz.com/attac...ine=1368969606 https://www.caraudioforumz.com/attac...ine=1368969606 https://www.caraudioforumz.com/attac...ine=1368969606 These washers did not stay in, they were used for mockup. check the drivers door install to see what screws/washers i used for the install. https://www.caraudioforumz.com/attac...ine=1368969606 https://www.caraudioforumz.com/attac...ine=1368969606 |
7 Attachment(s)
https://www.caraudioforumz.com/attac...ine=1368993436
https://www.caraudioforumz.com/attac...ine=1368993436 https://www.caraudioforumz.com/attac...ine=1368993436 https://www.caraudioforumz.com/attac...ine=1368993436 https://www.caraudioforumz.com/attac...ine=1368993436 https://www.caraudioforumz.com/attac...ine=1368993436 https://www.caraudioforumz.com/attac...ine=1368993436 |
space for future pics
|
Nice start bro keep the pics comming.
|
10 Attachment(s)
So I thought I would update with some progress. I cant edit or else this would go above.
I decided on which sub I wanted, Dynaudio MW190. its a 12" sub, but not an SPL type of sub, its pure sound quality. https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 I couldnt decide which trunk panel I wanted to build the enclosure behind, so I started by removing the passenger side and applied sound damper: https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 Then I decided to put it behind the drivers side panel since its flat and I wouldnt have to modify it, so off came that panel, and the fiberglassing began: https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 https://www.caraudioforumz.com/attac...ine=1371770772 more to come... |
3 Attachment(s)
So with my new knowledge of how large this box has to be (as close to 2.5 cuft as possible) I added a new section to the box that I was previously not going to use. Its the space above the wheel well. I know it wont double the air space, but I will build it as big as possible and then figure out how much air space I end up with. Worst care scenario, I can just install the sub in the face of the panel and run it free air behind the panel, but this not how I prefer to do it.
Also, I am not going to flush mount the sub like i usually do on my boxes, I need all air space I can get. https://www.caraudioforumz.com/attac...ine=1371834087 https://www.caraudioforumz.com/attac...ine=1371834087 https://www.caraudioforumz.com/attac...ine=1371834087 |
looks great man and excellent decision to go dynaudio!
Wish i could hear this when its done |
Thanks. With just the components it sounds great. I am worried that my box won't be big enough. I think I can get it to 1.75 cuft. I need to see how much can be made up by poly fill as I know that it gives the effect of a larger box.
|
| All times are GMT -5. The time now is 08:02 AM. |
© 2024 MH Sub I, LLC dba Internet Brands