Alright well ive got myself all the gear:

DLS iridium 8.3 3 ways, a lot of deadening, and my amp.

Im looking to get the most out of these speakers any way possible. Placement is obviously #1 but what about behind the speakers or time correction (not sure how to do). Im not exactly a newb ive done a bunch of installs with some slightly lower end components (2 ways) and have had pretty decent results. I just want to get the most out of these. Thanks in advance.

 

What kind of car? Amplifiers purchased yet?

Ideally, install the IR8's IB, give them loads of power. Place the IR3's off-axis and the UR1's either on the same plane as the IR3's or place them in the far corners of your a-pillars. If the IR3's and UR1's are on the same place, you can amplify them passively, but if not, go 3-way active. I suggest an alpine h-700/1 for control as control is everything.

Mark Bruno

 

I got a JLe2150 (i think, cant remember off the top of my head), Its going in an 04 ext cab silverado.

 

I think that amp is a 2 ch. model. Keep the speakers close to each other. Put the 8's in the doors and put the mids and tweets in the kicks on the same plane/axis.

Mark Bruno