Wiring Questions.
 

Hi All, Several months ago my brother removed his system from his car to make it a more desirable sell, and low and behold i bought the car, and need to re install the system, Consisting of

A Clarion VRX785BT
A JL 10W7 in factory H.O Box
A JL 500 1V2 (Sub amp)
A Jl 300 4V2 (former speaker amp)
Focal Polyglass Fronts (Mids and Tweeters)
Focal Access For the Rear

That i have no problem with, But the thought was to add a third amp (Unknown Focal Model bought a few years ago and never installed) To power the rears and use the JL 300/4V2 for the fronts , So the question is, if i intend to use the 4 channel JL to power just the front speakers can i run the "Front" Channels to power the mids and the "Rear" channels in 10k freq range to power the tweeters? or am i way off base here, Pardon my ignorance and thank you for your time, if you need any more info or pics of anything just let me know .

Yes you can, you need to set your hi pass filter for the tweeter correctly, check the focal set for the high pass crossover point and slope and use that setting on your amp.

Many thanks! I have pics up once this install gets underway