i have 3 jl 10w3v3's in a sealed box right now
the setup sounds good and gets pretty loud
but i want MORE lol
can anyone reccomend some box dimensions to help me out
p.s dont flame the jl got a really good deal

 

single 4 ohm wired to 1.33
and its going in a trailblazer

 

my amp has a subsonic filter any advice what it should be set at

 

Some subsonic filters are simply turned on/off with the push of a button. Some have a dial, like the Memphis amp I'm using. The SSF on my amp can be set between 25 and 50Hz. I set mine right in the middle, which should be about 37.5Hz. Each octave below that gets dropped in volume by 24dB, since its a 24dB/Oct. slope...

How much power are these subs getting right now? What amp are you using?

http://mobile.jlaudio.com/products_subs_enclusure.php?series_id=24 <<< Link to recommended enclosure volumes.

 

^^that's seems a little high to set your ssf, but if it sounds good..great. Usually, or typical settings are around 25-30 hz, but you can experiment...that's why it's user adjustable.

 

i have the exact same function on my amp its a switch with a dial from 25-50
its an arc audio KAR 900.1 so each so sub is getting 275 watts roughly

 

I wonder if it would be a less expensive route to find an amp that is capable of 1500W @ 1ohm. Since you're running at 1.33ohm, you wouldn't quite get the full output. If you got 1400W out of it, that'd be 466W per woofer. Almost double what you have now.
I'm curious which change would result in more bass, 600 more watts, or a new ported enclosure. Hell, do both. The subs can handle more. lol

 

Hifonics Brutus BXI1610D.