Car Audio Technical Discussions Dedicated to the technical side of Car Audio.

Too much amperage?

Thread Tools
 
Search this Thread
 
Old Jun 17, 2007 | 10:36 PM
  #1  
LOWTONEZ's Avatar
Thread Starter
500 Watt CAFz'r
iTrader: (3)
 
Joined: Apr 2007
Posts: 872
Too much amperage?

I have an Ultimate audio T3-1000D and it was working wonderfully last season and now it just goes into protect mode and makes intermitent flushes of power throughout my car. I have put a 150 amp fuse like it said to. I also have the big three done to my car and a 140 amp altenator. Even with a sub hooked up four or two ohms it still does not get out of protect mode. And like a said the power going up and down like waves is really weird to me. My 500 hundred watt phoenix amp works perfectly fine with a fuse that is much more overated for it. So i am thinking that there is too much amperage going to the amp or the amp just pooched. So if anyone has any ideas or suggestions please let me know because if i cant figure it out im gonna sell it for next to nothing or scrap it.
Old Jun 18, 2007 | 08:16 PM
  #2  
.ben's Avatar
50 Watt CAFz'r
iTrader: (1)
 
Joined: May 2007
Posts: 197
hummm... check all your conections and our grounds....kinna sounds like here could be a short somewhere?......if not i dunno man could be your amp.
Old Jun 20, 2007 | 01:35 AM
  #3  
spendawg's Avatar
50 Watt CAFz'r
 
Joined: Apr 2006
Posts: 163
well first off your battery doesnt send random voltage to your amp, your amp gets your battery to feed it power. the fuse is probably fine, your amp may be ****ed or you should check all the wirring, make sure the leads coming from the sub arent touching each other when going into the amp things like that
Old Jun 20, 2007 | 10:00 AM
  #4  
M.C. Ryan's Avatar
50 Watt CAFz'r
 
Joined: May 2004
Posts: 467
Originally Posted by r1d1n5p1nn3r5
My 500 hundred watt phoenix amp works perfectly fine
Just because a totally different amp works fine in the same install that could just mean that there is different technology in that amplifier that would make it more forgiving than your other one. Double check your wiring and if you are 100% sure it's not that, send it in to have it looked at by an authorized repair centre and they will be able to tell you for sure.
Old Jul 9, 2007 | 10:02 PM
  #5  
KingRukus's Avatar
500 Watt CAFz'r
iTrader: (9)
 
Joined: Aug 2001
Posts: 502
were u able to fix this issue?
Old Jul 9, 2007 | 10:14 PM
  #6  
LOWTONEZ's Avatar
Thread Starter
500 Watt CAFz'r
iTrader: (3)
 
Joined: Apr 2007
Posts: 872
Not yet

No, i hvent figured it out and anyone who is able to fix them hasnt replied so i am stuck with it for now until i figure something out.
Old Jul 10, 2007 | 05:32 AM
  #7  
JohnVroom's Avatar
Yankee
 
Joined: Oct 2003
Posts: 3,599
you have verified it is going into protect and not just turning on and off? if your connections are good and the power quality (voltage and current) is good and the amp is going into protect there is nothing to talk about except getting the amp serviced or replaced.

If it is turning itself on and off then there are options
Old Jul 10, 2007 | 07:06 AM
  #8  
PT-Chris's Avatar
500 Watt CAFz'r
iTrader: (1)
 
Joined: Sep 2002
Posts: 514
Its pooched,

if it is popping in and out of protect its done, we had almost all of the ones we brought in, go back for warranty.

Last edited by PT-Chris; Jul 10, 2007 at 08:19 AM.
Old Jul 10, 2007 | 07:57 AM
  #9  
KingRukus's Avatar
500 Watt CAFz'r
iTrader: (9)
 
Joined: Aug 2001
Posts: 502
is anyone familiar with the warranty terms on these amps?
Old Jul 10, 2007 | 08:20 AM
  #10  
PT-Chris's Avatar
500 Watt CAFz'r
iTrader: (1)
 
Joined: Sep 2002
Posts: 514
We were 1 year over the counter on all the ones we had.



All times are GMT -5. The time now is 07:51 AM.