CRX build part 2, testing
CRX build part 2, testing
Ok so I finally got the wires run and a box built and installed. It isn't pretty but thats ok its for SPL. My blue top is temporarily under the hood until I replace it...I have had this batt since like 2004 so its probobly time to upgrade to something better and that isn't so beat up. Initial score isn't too impressive but hopefully I will be able to get it higher once the batt is put in and perhaps new speakers and new boxes
oh the amps used are 2 Hifonics cyclops strapped at 1.4ohms, and obviously 2 10" SoloXs. The impedance rise isn't really ideal. Initial tests are showing a rise to over 3.5ohms, these amps should be seeing a reactive load of 2ohms but unfortunately I don't have many options as I can't strap at 0.5ohms and all the soloxs come in is dual 1.4 and dual 2
Well right now its street B because the battery is over 650 cubic inches and I have two amps, only problem is that I could be using 3 10s but I don't have 3 10s so I am using the two I have



