I don't think that enclosure will fit in your trunk

 

Well then I guess I'll just have to pay someone to make me one...

 

why don't you ask him what the dimensions are for that box, then go out to your car and measure the back seat opening and trunk depth to see if it's in the ballpark? it looks too wide to fit, but you won't know until you measure.

a box that big will most likely have to go in through the front. you may have to pull the front seat(s), but that isn't a big deal.

 

I built that box..it takes up the whole extra cab area of a dodge dakota
from wall to wall....it will not fit in that trunk

 

agreed it is a big box! its 49 inches long 27 inches high and 15 inches deep .

 

gotcha
wouldn't fit in a million years. ~36" wide is roughly the limit in a cobalt IIRC.

 

or he could wall off the trunk amp and batts in the back slot port on the drivers side

 

best thing to do would be to get something built for your DD's, don't waste your time and effort on anything else, especially with the power you are now going to be using once you make your purchase. TRUST ME, do some research, call "thumper" get his opinion just go about this in an orderly fashion, you'll be laughin'

 

I was in contact with PTS and he said it would take a few days to get the box done and installed, unfortunatly for me he is 4 hours away so I don't think that that would work. I think I am going to go with soundsgood for the box.

Thanks for all your imput guys.

 

best shop on the mainland hands down