I have a major problem with my recently installed Alpine H800 sound processor.

My setup:

1. Car: Civic FD 2006 model
2. Input source:
a. Stock integrated CD player
b. Kenwood's KOS-A300 radio upgrade system
3. Components in the front with no rear fills
4. Image Dynamic Subwoofer
5. Mosconi 4 Channel amp
6. Alpine RUX-C800 controller

Sound processor wiring setup:
Standard straight-forward installation of the wiring to power up the sound processor.

Here is the problem
1. The sound processor is warm by only having the ignition turned on(note at this point the processor Power On light is "off" and the music system is not turned on but its warming up already.

2. When the audio setup is all turned on, the music plays and from here on the sound processor temperature shoots up to 51.4 C in 4 mins and the music keeps playing as long as the processor is switched on but if I switch off the processor at this point and immediately switch it on there is no sound output at all. Everything is turned on the controller display everthing lights up but there is no sound at all.

Then i switch off the processor for 15 mins to let it cool down and then switch it on and everything works fine but yes the temperature rises once again.

PLEASE HELP! I have no clue why this is happening.

 

Probably you ay have problem in your wiring set up. Make sure that the Alphine RUX-C8 controller is in equipped with sound processor which is in the audio track system.

 

Hello Jeff thanks for the response but could you make it clear for me with the second part of your message?

Thanks again.