Anyone ever taken apart an Alpine CDA 9807

Subscribe
Oct 3, 2007 | 10:13 PM
  #1  
I pulled out the antenna lead from the back of deck when removing from car, it got hooked. I took apart deck to recrimp and reposition antenna. I got overzeallous with applied force and must of knocked off a spring from somewhere cause a little black one fell out. I assume it's for the eject mechanism. I can see two attached one on each front corner but can't tell where the third came from. Can anyone help or know of somewhere cheap to go in Montreal
Reply
Oct 4, 2007 | 04:36 PM
  #2  
Good Luck with that.

The alpine website will give you name and address of thier authorized service center.

I've been to thier service center here in Markham and they're pretty reasonable.
Reply
Oct 4, 2007 | 06:06 PM
  #3  
Quote: Good Luck with that.

The alpine website will give you name and address of thier authorized service center.

I've been to thier service center here in Markham and they're pretty reasonable.
I've already been in contact with the nearest service center and its $50 for a mandatory estimation and up to an additional $125 they repair without contacting you so basically if the guy wants he can tell me whatever and charge me $175. For a little spring it's not worth it, yeah I don't know where it goes but I tested the deck today without the cover and everything seems to work ,disc ejects and loads like before. But it seems there is a very limited knowledge base for this type of stuff. I'll just wait untill the piece that needed the spring breaks and then get a new one
Reply
Subscribe