RKnight

This is almost the same as the previous post on "deck wont turn on"
This is my problem..........


Everytime the bass hits hard I have been hearing static coming from my rear speakers the past week, I just thought it was a loose connection from the rear speakers, since my box is a top slotted port and it aims right underneath the rear speakers. Then today I was listening to some music on the way to work at about volume 22 goes up to 32 I belive. Then the static got louder and the head unit turned off, I just thought it was a burnt fuse, I checked the amp, headunit and main fuse and they are still good. I then unplugged my deck to reset it, still nothing. I havn't checked my main fuse box under my hood n stearing wheel. but I will.

Any other suggestions just let me know


thanks

avidedtr

iTrader: (11)

Try a Relay for the remote lines. I'll bet ya it's that!

sunfired

iTrader: (-1)

Keep in mind fuses can be bad and still look fine, change em up rather that just "look" at em.
Im kinda puzzled why avidedtr suggest's remote line, but meh anythings possible i suppose....

I would put my money on a blown 6x9 tho, unhook them and see if u power up.

ToxicAcoustiks

x2 on a blown speaker, what deck is this?

RKnight

Thanks for the replys, the relay avidedtr suggested is something I have to look more into, and have to contact an audio shop.

My deck is a: Kenwood KDC-M728


As soon as I read unhook the 6x9's I dropped what I was doing at work, went to my car, unhooked both speakers and still nothing. The red light on the actually unit still blinks when the face plate is off, and yesterday I was still able to eject a cd n put one in. now I cant. I checked my fuse box's and all seem good, i gotta find my fuse tester to check out each fuse to make sure.

Any other Idea's, driving without music what so ever is sooo boring.



Thanks

RKnight

Okay just abit of an update, I ran a wire from my positive to my remote channel on my amp, and my amp powered up just to make sure it was in working order, since I have sold it. I then took out my deck and the harness, got my stock deck attached it, and works perfectly. Does this mean my Kenwood is finished??

MR2NR

iTrader: (66)

Chances are from what I have read thus far is that the magic smoke that makes it work has been released....

gtr

time for a new deck

ToxicAcoustiks

what vehicle is it in? try doing a better ground

RKnight

Its in a Acura 1.6 EL, since last week when i noticed the static from the back speaker, my factory car alarm has been going off once in a while on its own. once it happen 3 times in 3 hours, it doesn't happen everyday but say every other day it will go off by itself. All this happen on the same week. Does it mean anything?