Car Audio Technical Discussions Dedicated to the technical side of Car Audio.

Problems plz help! im clueless

Thread Tools
 
Search this Thread
 
Old 07-24-2008, 11:21 AM
  #1  
0 Watt CAFz'r
Thread Starter
 
dirtskater's Avatar
 
Join Date: Feb 2008
Posts: 7
Problems plz help! im clueless

Ok I have a 15 inch Kicker L5, Dual 4ohm voice coils, Ive been running it on 2 Sony 1252GTRs for the past six months with no problems, one day my amps went into protects and I havnt got the 2 of them working together since, I Tried boths amps by themselves on each coil and they work find its as soon as I hook each of them up to there own coil that they go into protect ,Ive tried everything and I have no ideas what it could be any ideas? .I know the amps are cheap and htere just gettin me buy lol i should of known when i bought them, thanx
dirtskater is offline  
Old 07-24-2008, 11:28 AM
  #2  
4000 Watt CAFz'r
iTrader: (5)
 
zzzzzzz's Avatar
 
Join Date: Jan 2005
Posts: 4,643
have you jumped a car or did your battery almost die on you about the same time your amp went nfg?
zzzzzzz is offline  
Old 07-24-2008, 03:53 PM
  #3  
0 Watt CAFz'r
Thread Starter
 
dirtskater's Avatar
 
Join Date: Feb 2008
Posts: 7
nope the one amp went into protect then after 10 mins they both did my power is fine its capped 1 farad and its all 4 gauge wiring
dirtskater is offline  
Old 07-24-2008, 06:37 PM
  #4  
500 Watt CAFz'r
iTrader: (4)
 
92zed34's Avatar
 
Join Date: Dec 2004
Posts: 813
Is it possible the sub is bad, maybe the coils touching eachother ? Just a guess...
92zed34 is offline  
Old 07-24-2008, 07:14 PM
  #5  
4000 Watt CAFz'r
iTrader: (5)
 
zzzzzzz's Avatar
 
Join Date: Jan 2005
Posts: 4,643
bad NEG or bad sub but i would look at neg 1st
zzzzzzz is offline  
Old 07-24-2008, 08:24 PM
  #6  
1000 Watt CAFz'r
iTrader: (1)
 
sx4life's Avatar
 
Join Date: Mar 2007
Posts: 1,832
mind if I ask why are u running 2- 2channel amps to one sub, and how??? they are not strapable
sx4life is offline  
Old 07-24-2008, 09:19 PM
  #7  
50 Watt CAFz'r
 
turboeeyore's Avatar
 
Join Date: Sep 2007
Posts: 259
get a ohm meter and hook one probe to the neg. of one coil and one probe to the other neg. terminal and see if theres resistance, i bet the coils have shorted together.
turboeeyore is offline  
Old 07-24-2008, 10:23 PM
  #8  
0 Watt CAFz'r
Thread Starter
 
dirtskater's Avatar
 
Join Date: Feb 2008
Posts: 7
both 2 channels amps are bridged, anyways i used a multi meter on both coils and there both reading fine, now when i hook both coils up to the one amp it works fines , so i dont think they shorted together? and ive also taken the sub completely out of the box to look and i dont see anything wrong, ive checked my grounds and there all perfect , anymore ideas?
dirtskater is offline  
Old 07-24-2008, 10:25 PM
  #9  
0 Watt CAFz'r
Thread Starter
 
dirtskater's Avatar
 
Join Date: Feb 2008
Posts: 7
btw ur saying that if i use the multimeter and hook on side up to neg on one coil and hook the other side up to the neg on the other coil , if there resistance its shorted togethers? which meens the sub is bad? or is that fixable?
dirtskater is offline  
Old 07-24-2008, 11:22 PM
  #10  
4000 Watt CAFz'r
iTrader: (5)
 
zzzzzzz's Avatar
 
Join Date: Jan 2005
Posts: 4,643
if you use your multimeter , hook on side up to neg on one coil and the othere to + you will get your ohm of your VC
if you wire it 2ohm vc to 2 ohm vc then you will have 2 wires if you use your multimeter to the 2 wires you will get an ohm # if it is too low your amp might go into protect
zzzzzzz is offline  


Quick Reply: Problems plz help! im clueless



All times are GMT -5. The time now is 07:15 PM.