?!? Wanted: Info & Help w/BLADE DSP-2X ?!?
 

Howdy!
I'm looking for t/Blade DSP-2X Servo Programmer Software for my DSP-2X w/the "new" DSP-2XEM processor.
Unfortunately my old DSP-1 software (ver. 1.36) does not recognize the enhanced 2XEM processor. :dunno:
The eprom versions are 1x SVU1R39 & 1x SVU3R39 in my DSP-1 and 1x SVU1R39 & 1x SVU3R40 in t/DSP-2X.
Furthermore I'm looking for information about the slimline "RC-DSP" remote control, especially t/data and/or values of t/2 presets "A" & "B".

Out of curiosity & frustration I've taken my DSP-2X apart & noticed some very strange/interesting things 2 say t/least!
I was wondering if some of t/DSP-2X owners around here, if any, would like 2 share their insights w/me?

Btw. the "?factory?" seal on my DSP-2X was still intact - anyway here we go:

Here's t/seal on my DSP-2X.
http://www.imagehut.eu/images/94945D...ctory Seal.jpg

I've also noticed that someone has modified/?hacked? t/parallel port connections.
http://www.imagehut.eu/images/71827D...\' - 2.jpg

Furthermore t/resistor "R85" & t/transistor "Q8" are missing and the diode "D3" has been bypassed by a 9,44kOhm resistor.
http://www.imagehut.eu/images/86526DSP-2X.jpg

Detail shot:
http://www.imagehut.eu/images/7651DS...ode detail.jpg

??? Can anyone (current or ex-owner, employee or designer/technician) confirm these alterations / modifications ???
Thanx for your interest & patience !
:appl:

Any information WILL BE GR8ly appreciated!
I am looking forward 2 hearing from you soon!

Wow, I've never even seen a 2x version of the DSP. Good luck.

try looking here
http://ampguts.realmofexcursion.com/
i have not look to see if it is there

http://ampguts.realmofexcursion.com/
 

@
septuple "Z",
Thanks for your link/forum recommendation! :smilie_da
I've just joined "ROE" & posted my question over there, 2.
AFTER searching their forum without luck.

@
"Newb"
THANX!
It's actually an improved version of t/DSP-1 Servo w/a variable 12dB/oct. hipass x-over section (not pictured).

"roe"
 

Hi "ZZZZZZZ",
again thanks for the suggestion - but NO Thanks! ;)

:dunno:
Posted my question over there & got dissed.


Maybe 2 many :hah: pubescent juveniles over @ ROE 4 such a "major technicality"?

all questions almost answered
 

It's me - again!

I can now confirm that t/DSP-2X is supposed 2 l@@k like this on t/inside.
DSP-2X: Modified parallel port/solder side (2 traces cut & 2 new connections)
http://www.imagehut.eu/images/41908D...allel Port.jpg

DSP-2X: Modified circuit board/component side (transistor "Q8" & resistor "R85" missing, "D3" w/bypass resistor)
http://www.imagehut.eu/images/5590DS...Q8 missing.jpg

It was only a matter of t/right software version (DSPDOS rev.2.00 & upwards).
Special THANX 2 "tristan20" from t/car sound & performance-Forums 4 providing me with t/correct software! :appl:
Honorable mention:
"robmar", also from cs&p-Forums. Thanx 4 Software & Links! :smilie_da

..., but I'm still looking for information about BLADE's RC-DSP remote!
http://www.imagehut.eu/images/28810RC-DSP.jpg

Anyone?
:dunno:

i still have a manual i will see if it covers it and scan it for ya