?!? Wanted: Info & Help w/BLADE DSP-2X ?!?
#1
?!? Wanted: Info & Help w/BLADE DSP-2X ?!?
Howdy!
I'm looking for t/Blade DSP-2X Servo Programmer Software for my DSP-2X w/the "new" DSP-2XEM processor.
Unfortunately my old DSP-1 software (ver. 1.36) does not recognize the enhanced 2XEM processor.
The eprom versions are 1x SVU1R39 & 1x SVU3R39 in my DSP-1 and 1x SVU1R39 & 1x SVU3R40 in t/DSP-2X.
Furthermore I'm looking for information about the slimline "RC-DSP" remote control, especially t/data and/or values of t/2 presets "A" & "B".
Out of curiosity & frustration I've taken my DSP-2X apart & noticed some very strange/interesting things 2 say t/least!
I was wondering if some of t/DSP-2X owners around here, if any, would like 2 share their insights w/me?
Btw. the "?factory?" seal on my DSP-2X was still intact - anyway here we go:
Here's t/seal on my DSP-2X.
I've also noticed that someone has modified/?hacked? t/parallel port connections.
Furthermore t/resistor "R85" & t/transistor "Q8" are missing and the diode "D3" has been bypassed by a 9,44kOhm resistor.
Detail shot:
??? Can anyone (current or ex-owner, employee or designer/technician) confirm these alterations / modifications ???
Thanx for your interest & patience !
Any information WILL BE GR8ly appreciated!
I am looking forward 2 hearing from you soon!
I'm looking for t/Blade DSP-2X Servo Programmer Software for my DSP-2X w/the "new" DSP-2XEM processor.
Unfortunately my old DSP-1 software (ver. 1.36) does not recognize the enhanced 2XEM processor.
The eprom versions are 1x SVU1R39 & 1x SVU3R39 in my DSP-1 and 1x SVU1R39 & 1x SVU3R40 in t/DSP-2X.
Furthermore I'm looking for information about the slimline "RC-DSP" remote control, especially t/data and/or values of t/2 presets "A" & "B".
Out of curiosity & frustration I've taken my DSP-2X apart & noticed some very strange/interesting things 2 say t/least!
I was wondering if some of t/DSP-2X owners around here, if any, would like 2 share their insights w/me?
Btw. the "?factory?" seal on my DSP-2X was still intact - anyway here we go:
Here's t/seal on my DSP-2X.
I've also noticed that someone has modified/?hacked? t/parallel port connections.
Furthermore t/resistor "R85" & t/transistor "Q8" are missing and the diode "D3" has been bypassed by a 9,44kOhm resistor.
Detail shot:
??? Can anyone (current or ex-owner, employee or designer/technician) confirm these alterations / modifications ???
Thanx for your interest & patience !
Any information WILL BE GR8ly appreciated!
I am looking forward 2 hearing from you soon!
Last edited by SNDZ2GD; 02-23-2007 at 12:09 PM.
#4
http://ampguts.realmofexcursion.com/
@
septuple "Z",
Thanks for your link/forum recommendation!
I've just joined "ROE" & posted my question over there, 2.
AFTER searching their forum without luck.
@
"Newb"
THANX!
It's actually an improved version of t/DSP-1 Servo w/a variable 12dB/oct. hipass x-over section (not pictured).
septuple "Z",
Thanks for your link/forum recommendation!
I've just joined "ROE" & posted my question over there, 2.
AFTER searching their forum without luck.
@
"Newb"
THANX!
It's actually an improved version of t/DSP-1 Servo w/a variable 12dB/oct. hipass x-over section (not pictured).
#5
"roe"
Originally Posted by zzzzzzz
try looking here
http://ampguts.realmofexcursion.com/
i have not look to see if it is there
http://ampguts.realmofexcursion.com/
i have not look to see if it is there
again thanks for the suggestion - but NO Thanks!
Posted my question over there & got dissed.
Maybe 2 many pubescent juveniles over @ ROE 4 such a "major technicality"?
#6
all questions almost answered
It's me - again!
I can now confirm that t/DSP-2X is supposed 2 l@@k like this on t/inside.
DSP-2X: Modified parallel port/solder side (2 traces cut & 2 new connections)
DSP-2X: Modified circuit board/component side (transistor "Q8" & resistor "R85" missing, "D3" w/bypass resistor)
It was only a matter of t/right software version (DSPDOS rev.2.00 & upwards).
Special THANX 2 "tristan20" from t/car sound & performance-Forums 4 providing me with t/correct software!
Honorable mention:
"robmar", also from cs&p-Forums. Thanx 4 Software & Links!
..., but I'm still looking for information about BLADE's RC-DSP remote!
Anyone?
I can now confirm that t/DSP-2X is supposed 2 l@@k like this on t/inside.
DSP-2X: Modified parallel port/solder side (2 traces cut & 2 new connections)
DSP-2X: Modified circuit board/component side (transistor "Q8" & resistor "R85" missing, "D3" w/bypass resistor)
It was only a matter of t/right software version (DSPDOS rev.2.00 & upwards).
Special THANX 2 "tristan20" from t/car sound & performance-Forums 4 providing me with t/correct software!
Honorable mention:
"robmar", also from cs&p-Forums. Thanx 4 Software & Links!
..., but I'm still looking for information about BLADE's RC-DSP remote!
Anyone?
Thread
Thread Starter
Forum
Replies
Last Post