wtb: 5Ch. Amp
#4
I have an Eclipse 5 channel, practically brand new:
Model # EA3532
RMS Power at 4 Ohms 40 W x 4 + 120 W x 1
RMS Power at 2 Ohms 60 W x 4 + 120 W x 1
Frequency Response 20 Hz - 20000 Hz
Signal to Noise Ratio 105 dB
Crossover / Equalizer
Bass Boost Without Bass Boost
Low - Pass Frequency 50 Hz - 200 Hz
High - Pass Frequency 50 Hz - 200 Hz
Other Features
Input Voltage 13.8 volt
MOSFET Circuitry Yes
Dimensions
Width 15.75 in.
Depth 10.82 in.
Height 2.04 in.
Taking offers and willing to ship.
Model # EA3532
RMS Power at 4 Ohms 40 W x 4 + 120 W x 1
RMS Power at 2 Ohms 60 W x 4 + 120 W x 1
Frequency Response 20 Hz - 20000 Hz
Signal to Noise Ratio 105 dB
Crossover / Equalizer
Bass Boost Without Bass Boost
Low - Pass Frequency 50 Hz - 200 Hz
High - Pass Frequency 50 Hz - 200 Hz
Other Features
Input Voltage 13.8 volt
MOSFET Circuitry Yes
Dimensions
Width 15.75 in.
Depth 10.82 in.
Height 2.04 in.
Taking offers and willing to ship.
#7
I have a Phoenix Gold Route 66 I might let go of. Let me know.
4 ohm stereo @ 12/13.8 VDC
(M25, M44) 25/65 by 2, 40/55 by 4 WRMS
2 ohm stereo @ 13.8 VDC
(M25, M44) 70 by 2, 80 by 4 WRMS
4 ohm bridged @ 13.8 VDC
(M25, M44) 140 by 1, 105 by 2 WRMS
Crossover Frequencies
30Hz to 600Hz
Crossover Slopes
12dB per Octave
Bass EQ
0 to + 12dB @ 45Hz
Input Sensitivity
200mV to 2 Volts
Minimum Impedance
2 ohm bridged/1 ohm stereo
Case Dimensions
26.25"L x 10.63"W x 2.0"H
Dimensions with Flanges and Terminal Blocks
26.25"L x 11.63"W x 2.0"H
4 ohm stereo @ 12/13.8 VDC
(M25, M44) 25/65 by 2, 40/55 by 4 WRMS
2 ohm stereo @ 13.8 VDC
(M25, M44) 70 by 2, 80 by 4 WRMS
4 ohm bridged @ 13.8 VDC
(M25, M44) 140 by 1, 105 by 2 WRMS
Crossover Frequencies
30Hz to 600Hz
Crossover Slopes
12dB per Octave
Bass EQ
0 to + 12dB @ 45Hz
Input Sensitivity
200mV to 2 Volts
Minimum Impedance
2 ohm bridged/1 ohm stereo
Case Dimensions
26.25"L x 10.63"W x 2.0"H
Dimensions with Flanges and Terminal Blocks
26.25"L x 11.63"W x 2.0"H
#8
Diamond D7056:
50w x 6 @ 4 ohms (can bridge 2 ch to get 50w x 4 + 200w x 1)
Built-in 18dB/oct xovers
Very flexible, looks gorgeous, built like a tank, and in mint condition.
C$625
[ January 09, 2006, 11:14 AM: Message edited by: sac ]
50w x 6 @ 4 ohms (can bridge 2 ch to get 50w x 4 + 200w x 1)
Built-in 18dB/oct xovers
Very flexible, looks gorgeous, built like a tank, and in mint condition.
C$625
[ January 09, 2006, 11:14 AM: Message edited by: sac ]
Thread
Thread Starter
Forum
Replies
Last Post