18" prob
#1
18" prob
i need to find somewhere in barrie to build my box. i have 2 18" ma hard Kore subs. from the spec sheet
PARAMETERS
KORE 18
Fo (Hz) 33
QMS 4.98
QES 0.87
QTS 0.82
VAS (Liters) 28.76
REVC (Ohms) 5.2 (series)
SPL @ 1 watt / 1 meter (dB) 88.9
X-max Linear pk-pk (mm) 28
LEVC at 1k Hz (mH) 1.9
ENCLOSURE VOLUME'S SEALED
Minimum sealed (Cu. Ft) 1.75
Fill Required (%) No
3dB down point (-3dB Hz) 41
Maximum sealed (Cu. Ft) 2.5
Fill Required (%) No
3dB down point (-3dB Hz) 38
ENCLOSURE VOLUME'S PORTED
7 ftcu.
PORT SIZE 15 x 5 x 11.75
tune to fit application custom 42 HZ decrease legnth to raise freq.
SEALED 3 ftcu.
The ride is 2000 Ford Explorer. Should i build a wall, or just a big bad *** box ?
PARAMETERS
KORE 18
Fo (Hz) 33
QMS 4.98
QES 0.87
QTS 0.82
VAS (Liters) 28.76
REVC (Ohms) 5.2 (series)
SPL @ 1 watt / 1 meter (dB) 88.9
X-max Linear pk-pk (mm) 28
LEVC at 1k Hz (mH) 1.9
ENCLOSURE VOLUME'S SEALED
Minimum sealed (Cu. Ft) 1.75
Fill Required (%) No
3dB down point (-3dB Hz) 41
Maximum sealed (Cu. Ft) 2.5
Fill Required (%) No
3dB down point (-3dB Hz) 38
ENCLOSURE VOLUME'S PORTED
7 ftcu.
PORT SIZE 15 x 5 x 11.75
tune to fit application custom 42 HZ decrease legnth to raise freq.
SEALED 3 ftcu.
The ride is 2000 Ford Explorer. Should i build a wall, or just a big bad *** box ?
Last edited by Menace; 01-25-2007 at 07:53 PM.
#6
that sub is all bl and nothing linear.... kind of like kicker only it will kick an L7s ***.....
Id run it in winisd but since you are a newb Id say a phat *** wall sealed up....... 2-4kw daily and burp it with 2x that.....
Id run it in winisd but since you are a newb Id say a phat *** wall sealed up....... 2-4kw daily and burp it with 2x that.....