AVI SL200 specs and enclosure recommendations
#1
AVI SL200 specs and enclosure recommendations
Hey folks, I'm new here and have a couple of questions that someone in this forum might have the answers to. Being down here in the states I can't get ANY info on these speakers from anyone it seems.
I have a pair of AVI SL200 8 inchers that I have owned since purchasing them new in 1991, these are new in the box and never mounted. I'm finally getting around to putting them to use.
Does anyone have any specs out there on these old AVI's? I specifically need the driver volume specs for top and bottom mounting them.
Has anyone out there used these and what would be your recommendations for a good ported enclosure to mount them in?
I listen mainly to rock/pop/country so this is going to be more of an SQ system install in my 97 GMC Jimmy than anything, no rap and this will never be used in any competitions.
Thanks,
Scott
I have a pair of AVI SL200 8 inchers that I have owned since purchasing them new in 1991, these are new in the box and never mounted. I'm finally getting around to putting them to use.
Does anyone have any specs out there on these old AVI's? I specifically need the driver volume specs for top and bottom mounting them.
Has anyone out there used these and what would be your recommendations for a good ported enclosure to mount them in?
I listen mainly to rock/pop/country so this is going to be more of an SQ system install in my 97 GMC Jimmy than anything, no rap and this will never be used in any competitions.
Thanks,
Scott
#2
Hey folks, I'm new here and have a couple of questions that someone in this forum might have the answers to. Being down here in the states I can't get ANY info on these speakers from anyone it seems.
I have a pair of AVI SL200 8 inchers that I have owned since purchasing them new in 1991, these are new in the box and never mounted. I'm finally getting around to putting them to use.
Does anyone have any specs out there on these old AVI's? I specifically need the driver volume specs for top and bottom mounting them.
Has anyone out there used these and what would be your recommendations for a good ported enclosure to mount them in?
I listen mainly to rock/pop/country so this is going to be more of an SQ system install in my 97 GMC Jimmy than anything, no rap and this will never be used in any competitions.
Thanks,
Scott
I have a pair of AVI SL200 8 inchers that I have owned since purchasing them new in 1991, these are new in the box and never mounted. I'm finally getting around to putting them to use.
Does anyone have any specs out there on these old AVI's? I specifically need the driver volume specs for top and bottom mounting them.
Has anyone out there used these and what would be your recommendations for a good ported enclosure to mount them in?
I listen mainly to rock/pop/country so this is going to be more of an SQ system install in my 97 GMC Jimmy than anything, no rap and this will never be used in any competitions.
Thanks,
Scott
but here you go
MODEL AVI SL-200, 200 mm (8") SUBWOOFER DRIVER
APPLICATIONS This is a subwoofer driver for medium sized high performance sound systems.
Suggested operating range is 50 to 700 Hz.
PERFORMANCE 33 to 1850 Hz at -10 dB points, in optimum vented enclosure.
52 to 700 Hz at -3 dB points, in optimum vented enclosure.
400 watts music program material.
200 watts AES pink noise rating.
90 dB average, at 1 watt and 1 meter, in half space.
4 ohm nominal, 3.1 ohm minimum.
FEATURES Cast aluminum frame with cavity vents, black finish.
Extended and vented pole piece with integrated bottom plate.
Both top and bottom plates with CNC and black absorbing finish.
Yellow HX type woven fiberglass cone with linearity damped composite rubber edge.
Heavy duty gold plated brass terminals.
850 g (30 oz) magnet.
50 mm (2") copper ribbon voice coil, OFC edge wound.
PHYSICAL 214 mm (8.4") overall diameter.
96 mm (3.8") overall depth.
182 mm (7.17") cut out hole diameter.
89 mm (3.5") mounting depth.
3 Kg (6.5 lbs) weight.
T/S DATA Znom 4 Ω Revc 3.1 Ω Fo 39 Hz
Sd 0.025 M2 (38.76 in2) Le 0.832 mH SPL 90 dB
Xmax 3.75 mm (0.15 in) Qms 7.015 BL 9.46 TM
Vas 26.83 L (0.95 ft3) Qes 0.34 Pnom 200 W
Cms 412.5 μm/N Qts 0.324 Pmax 400 W
For enclosure
AVI SL-200 APPLICATION NOTE
NET TOTAL PORTS DIA LENGTH FILL Fb F-3 NOTES
VOLUME VOLUME (Hz) (Hz)
CLOSED A 5.5 L 7 L 96 Qtc=0.707
0.2 ft3 0.25 ft3
CLOSED B 9.5 L 11 L 94 Qtc=0.577
0.3 ft3 0.4 ft3
VENTED A 10.5 L 14 L 1 65 mm 390 mm Minimal 45 60 Optimum
0.4 ft3 0.5 ft3 2.5" 15.4"
VENTED B 17 L 20 L 1 65 mm 300 mm Minimal 40 52 X-Bass
0.6 ft3 0.7 ft3 2.5" 11.8"
--------------------------------------
hope that help...good luck with the build
Last edited by UNRATED; 04-30-2010 at 07:01 PM.
Thread
Thread Starter
Forum
Replies
Last Post
wasted911
General Discussion
7
05-04-2017 08:40 PM
yellowamp1
Enclosure Design & Construction Help
1
08-15-2006 08:12 PM