bart1243

Hi,Could someone post a design for a ported box for a 10" sub please...just a basic generic design would be great...its an older Kenwood sub I dont have the specs for so anything would be great...thank you

bart1243

sub is a Kenwood kfc-xw10db if that helps

scuba789

You could build a box that is 15.5" wide, 15.5" deep and 13.5" tall (external dimensions). This gives you an internal volume of 1.23 cubic feet after port and driver displacement. Using a 3" diameter port that is 11" long will give you a tuning frequency around 34 hz.

bart1243

thank you very much...I have never put a round port in....but I will give it a try....thanks again

bart1243

how do I convert a round port to a sloted port? as in a 3" dia by 11" port to a sloted