design new sub box
#1
design new sub box
getting a new woofer, Orion hcca one of the 96db ones
anyways im trying to find some plans specific to this sub or some specs that arent just estimates
couldnt find much
but yea basically looking for a box that will make my bass tracks, rap, whatever I give it to be earth shaking
thanks again
anyways im trying to find some plans specific to this sub or some specs that arent just estimates
couldnt find much
but yea basically looking for a box that will make my bass tracks, rap, whatever I give it to be earth shaking
thanks again
#2
Not sure if this helps at all, but it does sound about right, 2.25 cu.ft. found here at :
http://www.cardomain.com/item/ORIHCCA12D
The enclosure should be tuned between 30 - 40 Hertz for it to shake the ground the right way, plus it sounds amazing at those frequencies. I would try out 35 first and from there you will see if you can go lower or higher. Also, I have had some success with slot ports usually around 3" wide so I would also give that a try.
Do you need help with the building of the enclosure? Practice using WinISD Pro, as long as you can find the Specs on that subwoofer WinISD will help you with everything you need.
WinISD Pro can be found here :
http://www.linearteam.dk/default.aspx?pageid=winisdpro
http://www.cardomain.com/item/ORIHCCA12D
The enclosure should be tuned between 30 - 40 Hertz for it to shake the ground the right way, plus it sounds amazing at those frequencies. I would try out 35 first and from there you will see if you can go lower or higher. Also, I have had some success with slot ports usually around 3" wide so I would also give that a try.
Do you need help with the building of the enclosure? Practice using WinISD Pro, as long as you can find the Specs on that subwoofer WinISD will help you with everything you need.
WinISD Pro can be found here :
http://www.linearteam.dk/default.aspx?pageid=winisdpro
Thread
Thread Starter
Forum
Replies
Last Post
alexdbest2000
General Discussion
3
08-26-2007 10:37 PM
hott-nix
Enclosure Design & Construction Help
15
05-26-2007 03:18 PM