Device for cutting out holes for speakers?
12-19-2009, 09:40 PM
#1
Device for cutting out holes for speakers?
Hi guys. I need your help on this one.
I went through a Mastercraft serpentine saw and now I have a router with a table made also by Mastercraft. I think the router is way better in control then that damn serpentine saw, but the set didnt came with anything to cut out holes(I know I can do it by hand but there should be some tool or attachment to make it easier). The table that the router came with is just useless as it can only do edges and nothing bigger the 2inches (i think the best part is that you can adjust the distance to -1.25... yeah negative the router bit is hidden I have no clue whats that for as the biggest bit for this router is .75 diameter that makes sense for -.375).... anyhow I am going to return that table+router set tomorrow...
Please tell me what you guys use to cut out nice holes for speakers, rings etc (I am working with 3/4 mdf I guess like most of you)- any brand preference? what accessories do i need for that? I really want to learn to do this myself....
I went through a Mastercraft serpentine saw and now I have a router with a table made also by Mastercraft. I think the router is way better in control then that damn serpentine saw, but the set didnt came with anything to cut out holes(I know I can do it by hand but there should be some tool or attachment to make it easier). The table that the router came with is just useless as it can only do edges and nothing bigger the 2inches (i think the best part is that you can adjust the distance to -1.25... yeah negative the router bit is hidden I have no clue whats that for as the biggest bit for this router is .75 diameter that makes sense for -.375).... anyhow I am going to return that table+router set tomorrow...
Please tell me what you guys use to cut out nice holes for speakers, rings etc (I am working with 3/4 mdf I guess like most of you)- any brand preference? what accessories do i need for that? I really want to learn to do this myself....
12-19-2009, 10:16 PM
#2
Jasper Jig
Available at BusyBee Tools
Available at BusyBee Tools
12-19-2009, 10:20 PM
#3
50 Watt CAFz'r
Join Date: May 2008
Posts: 365
router with circle jig!
check lee valley Precision Circle Jig - Lee Valley Tools
or busy bee tools The Home of Busy Bee Tools
the jasper jig is the most populer and very easy to use Circle guide model#200
http://www.jaspertools.com/productsd...Circle%20Guide
this is the one i use. baught it at busybee tools last year
gl
check lee valley Precision Circle Jig - Lee Valley Tools
or busy bee tools The Home of Busy Bee Tools
the jasper jig is the most populer and very easy to use Circle guide model#200
http://www.jaspertools.com/productsd...Circle%20Guide
this is the one i use. baught it at busybee tools last year
gl
12-19-2009, 11:51 PM
#4
K so I still need a router then- I think I will keep that set then and try to sell the table.... this "circle jig" is just a piece of plastic isn't? does it screw in to the wood at the pivot point? The jasper tools have all their FAQ and video section under construction so I'm asking you guys..... is mastercraft good quality for the price? I paid $110 for that set....
Ok nvm i figured it out that you just place a nail in the whole lol- nice idea thanks guys! - but still is it a good router that I bought?
Ok nvm i figured it out that you just place a nail in the whole lol- nice idea thanks guys! - but still is it a good router that I bought?
Last edited by LaZyLuke; 12-19-2009 at 11:59 PM.
12-20-2009, 08:56 AM
#6
50 Watt CAFz'r
Join Date: May 2008
Posts: 365
my router is a very old all metal B&D router that is still very strong motor wise.
when it comes to tools you get what you pay for. that being said. if it works for you and gets the job done than keep it.
for a little more money though you can have a much better router, but if you are only going to make a few holes a year than dont waste the money
the jasper guide is plastic and has holes for screwing it to just about all routers made today. there is a guide pin that you drill a 1/8" hole for to guide the router. the other holes are the size set holes for determining the size of you hole that you are routing. when you get it in your hands it will all make sense.
gl
when it comes to tools you get what you pay for. that being said. if it works for you and gets the job done than keep it.
for a little more money though you can have a much better router, but if you are only going to make a few holes a year than dont waste the money
the jasper guide is plastic and has holes for screwing it to just about all routers made today. there is a guide pin that you drill a 1/8" hole for to guide the router. the other holes are the size set holes for determining the size of you hole that you are routing. when you get it in your hands it will all make sense.
gl
12-20-2009, 11:10 PM
#9
I returned the set and went for black and decker plunge router for 79 dollars, was cheaper then a fixed router by mc and it has variable speeds which is nice. Didn't come with bits but I got some old side cutters from my step dads work which work nicely... And I couldn't wait for that guide(not avaible at local places) so I made one myself with my step dad using plywood and a boring mill... I will know how it works tomoro 
... If anyone wants o can post pics- nothing impressive lol it was done in 10min on a bend saw and mill lol
... If anyone wants o can post pics- nothing impressive lol it was done in 10min on a bend saw and mill lol
