i want to make a box for my t1 10" 4 ohm. what would you guys reccommend, ported, sealed, what size etc. oh and if possible what amp?

 

Is that an RF?

Listening to rap, with a quality custom box: ported 1-1.5 cubic feet @ 30-35hz.

Anything else: sealed 1-1.25 cubic feet.

Amp: whatever RMS the sub is. Isn't it 1000W?

 

Is it a T110D2 or D4?

Vented - Recommended

Vb (min.) 1.00 cu. ft.
Vb 1.50 cu. ft.
Vb (max.) 2.00 cu. ft.
Fb 40 Hz
Height 15.5 in.
Width 20.25 in.
Depth 12.5 in.
Np 1 port
Dp 4 in. diameter
Lp 11 in. long
Spk. Cutout 9.3125 in.
Spk. Depth 6.25 in.
Vd 0.065 cu. ft.
Vp 0.08 cu. ft.



• All sides use 3/4" thick MDF.
• All box dimensions are external.
• Dimensions above include Vb + woofer/port displacement.
• Port diagram for reference only and may require alternate placement.
• An infrasonic filter is required for reliable performance in vented designs.


How's that?

 

^ Box is roughly 40.25 HZ, ala Subwoofer Enclosure Calculators, Fraction to Decimal, Parallel, Series, Port Length and Volume Calculators