Enclosure Design & Construction Help Post and discuss your car audio box construction, design, fiberglass and other fabrication questions here.

Here's how you put 2 18's in a trunk in 10 cubes

Thread Tools
 
Search this Thread
 
Old Oct 10, 2010 | 01:07 AM
  #1  
Lord Huggington's Avatar
Thread Starter
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Apr 2006
Posts: 1,462
Here's how you put 2 18's in a trunk in 10 cubes

This is a box design for two 18's with the port and sub facing into the cabin, it's two boxes. You of course lose your back seat.

You can fit two 18's into an Alero trunk if you cut the trunk opening to the maximum (20.75 x 38), maybe a grand AM or a like-chassis. I'm pretty sure you could fit two of these boxes through the doors (20.75 x 19 x 53ish depth), which you'd have to take off.

Sub must be outside diameter 18.5, cut-out 16.75, .26 displacement.

Just put two of these side by side:

5 cf3 @ 33 hz





The first verticle blue line is the end of the rear deck. The second verticle blue line is the front seats.
Old Oct 10, 2010 | 12:10 PM
  #2  
jalat's Avatar
2000 Watt CAFz'r
iTrader: (6)
 
Joined: Mar 2008
Posts: 2,736
will not fit in a 2dr alero
Old Oct 10, 2010 | 02:36 PM
  #3  
Lord Huggington's Avatar
Thread Starter
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Apr 2006
Posts: 1,462
< 4-door.

What's the max. square you can put through the door? Mine is like 21 x 28, how does 19 x 20.75 not fit? Is it the depth of the box? Even I would have to take the doors and seats out, and then shimmy/angle the box in to fit 53" depth. There's 49" at the lowest between the doors on the inside. Tight fit...
Old Oct 10, 2010 | 03:21 PM
  #4  
JDN1014's Avatar
--SPECIAL ED--
 
Joined: Aug 2010
Posts: 138
better have lots of power for that 18 in 5 cubes.. i know a 18 BTL bearly moves in 5.75 cubes on 3k..
Old Oct 10, 2010 | 03:23 PM
  #5  
Lord Huggington's Avatar
Thread Starter
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Apr 2006
Posts: 1,462
What would you power it with?
Old Oct 10, 2010 | 03:57 PM
  #6  
jalat's Avatar
2000 Watt CAFz'r
iTrader: (6)
 
Joined: Mar 2008
Posts: 2,736
Originally Posted by Lord Huggington
What would you power it with?

a 600v three phase transformer
Old Oct 10, 2010 | 04:40 PM
  #7  
JDN1014's Avatar
--SPECIAL ED--
 
Joined: Aug 2010
Posts: 138
Originally Posted by jalat
a 600v three phase transformer
pretty much...

2 15s in that area may even work better
Old Oct 10, 2010 | 05:43 PM
  #8  
Lord Huggington's Avatar
Thread Starter
1000 Watt CAFz'r
iTrader: (1)
 
Joined: Apr 2006
Posts: 1,462
Originally Posted by jalat
a 600v three phase transformer
Old Oct 10, 2010 | 07:38 PM
  #9  
fresh1's Avatar
2000 Watt CAFz'r
iTrader: (2)
 
Joined: Feb 2008
Posts: 2,063
Originally Posted by jalat
a 600v three phase transformer
lolll hahaha
Old Oct 20, 2010 | 02:10 PM
  #10  
braden johns's Avatar
0 Watt CAFz'r
 
Joined: Oct 2010
Posts: 5
You have a great list of places to visit and you did a good job of grouping them. I reviewed the list and sorted by General Area (Upper West Side/Midtown/Downtown) and then by Neighborhood (in Parentheses). I also sorted in descending street order so as you make your way in one direction, for example the items on 5th Ave start at 59th street and work down to 34th Street.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
WESt9891
Enclosure Design & Construction Help
1
Feb 11, 2014 12:46 AM
canuckerjay
Enclosure Design & Construction Help
3
May 26, 2011 01:18 PM
SOULMUSIC
Car Audio Technical Discussions
0
Feb 22, 2011 06:45 AM
Father Yuli
Canadian General Car Audio Discussion
26
Mar 2, 2004 09:19 PM




All times are GMT -5. The time now is 02:48 PM.