My box build
#1
My box build
So after making endless designs for everyone else. I was finaaly able to get to my box and car for the rest of the stuff that needed to be done. After talking with tons of people, team members and competitors. I have decided with a box that is just under 6 cubes gross. 2.5 after sub and port displacments tuned to 41hz with 100 sq.in of port and subs staggered and resined inside.
I also had to re run my wire properly through the frame rather then over and have humps in my carpet. Also to this i had to grind out some of my trunk/rear deck section to get the box to fit. Body filled and sanded. I still have to paint it.
This will be for my 2-10 inch crunch ground pounder subs and my GPV2000.1 amp. I did very well with this sub and amp last year but the box was not that great so here are some of the pics, my camera died and was able to take more once the box was primed. I just have to paint everything and ill be banging again.
LINK
http://img26.imageshack.us/gal.php?g=car001p.jpg
I also had to re run my wire properly through the frame rather then over and have humps in my carpet. Also to this i had to grind out some of my trunk/rear deck section to get the box to fit. Body filled and sanded. I still have to paint it.
This will be for my 2-10 inch crunch ground pounder subs and my GPV2000.1 amp. I did very well with this sub and amp last year but the box was not that great so here are some of the pics, my camera died and was able to take more once the box was primed. I just have to paint everything and ill be banging again.
LINK
http://img26.imageshack.us/gal.php?g=car001p.jpg
Last edited by LOWTONEZ; 08-26-2009 at 07:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Cavalier Chunk
Enclosure Design & Construction Help
14
03-25-2005 04:59 AM
The Professor
General Discussion
0
09-22-2003 06:10 PM