I'll be honest... I can't get past step 1 of using WinISD or any other similar program. Hopefully someone here has some time to spare to help me out.

(1) Mach 5 IXL-12 v2 BR Dual 2 ohm.

Fs (Hz) 26
Re (Ohms) 3.7
Qes 0.32
Qms 6.24
Qts 0.31
VAS (L) 34
Sd (cm2) 411
BL 21.8
Xmax (mm) 22

Outside Diameter - 31.1cm
Mounting Diameter - 27.9cm
Mounting Depth - 16.5cm

Mach 5 recommends 40L (1.4 cu. ft.) 30Hz tuning, which seems stupidly small to me. Since this is going to be used only for daily listening, I was thinking maybe 2 cubes @ 35hz? Suggestions are welcome and help is appreciated; designing enclosures was never my strong suit.

 

1.6 cubic feet @ 34hz

 

Thanks brah.

 

Let me know if you need a hand with a design.

 

how much power are you going to put to that sub?. I picked up a few of those subs, I am working on a build for them now.

let me know how yours works for you.

 

Assuming I still get it; 700 watts. The system is for a friend who just wants some bump, they are 800wrms but with 700w and a good box it should sounds good. I have 4 15" MAW's which aren't made by Mach 5 anymore, and they sound great.