memo76

i got 6 12s earthquake magmas subs in a box that is 49x35x18 and i wanted tuned @45hz and i need some help with the por size

DDnut

iTrader: (6)

do you want diameter or do you need tunning and al that as well.I would not go with less the 4 6" ports tunning would put you at 3.5" long.Or are you looking at slot ports.You just gave use almost nothing to work with but a 14cu box,tune and subs.Are they chambered on there own?

memo76

all 6 subs are in one box facing up in a 94 s10 blazzer and i want a single port for all 6 subs what would be the best way to go with

DDnut

iTrader: (6)

then you need a new box or put a huge plug port in but not easy with 18" high

memo76

should i stay with a seald box then?

DDnut

iTrader: (6)

If you don`t want to rebuild the box or go round ports yes thats all you can do

memo76

i guess i would have to go with a smaller box then

DDnut

iTrader: (6)

not realy thats a good size but design it with a rear fire slot port or a top fire port if it will let you for that tunning

Father Yuli

iTrader: (17)

you need to tune lower than 45hz. it will sound terrible for music.

DDnut

iTrader: (6)

I was thinking by the tune he was wanting just SPL but yes Yuli is right for music you would want the tune about 32Hz or maybe even a bit lower in around 28Hz for them subs.They get mean and low when tuned right.I always liked the Magmas