TYpe X BOX **CUSTUM**
#21
lol ok thank you.
and to be fair i have no idea what the difference would be with the box as long as you calculated everything and seal it up rlly good. also i like the table your using to work on (the old sub) haha.
well anyways good luck. if your gonna paint the sub box do it by hand and make a cool design lol.
and to be fair i have no idea what the difference would be with the box as long as you calculated everything and seal it up rlly good. also i like the table your using to work on (the old sub) haha.
well anyways good luck. if your gonna paint the sub box do it by hand and make a cool design lol.
#22
i changed the oil for 100$ my self.. 7 liters of full synthetic mobil one isnt cheap.
i dont have the HK system, i dont even have the stock amp(that i can find,.,., maybe i have the euopean version..)
the only thing i am really looking for is a little washer type thing that goes on the windshild wiper, its shaped like a V. i need the one off the passenger side.
i dont tihnk shipping from toronto to alberta would be good for bucket seats hey
but il pm you about the windshild wiper washer!
now back on track to this thred, does any one know the wireing diagram for the pins in the back of the radio, so i can ghetto rig some wires and not buy a wiring harness??
i dont have the HK system, i dont even have the stock amp(that i can find,.,., maybe i have the euopean version..)
the only thing i am really looking for is a little washer type thing that goes on the windshild wiper, its shaped like a V. i need the one off the passenger side.
i dont tihnk shipping from toronto to alberta would be good for bucket seats hey
but il pm you about the windshild wiper washer!
now back on track to this thred, does any one know the wireing diagram for the pins in the back of the radio, so i can ghetto rig some wires and not buy a wiring harness??
i drove 53,000 km since september, and i do my oil change every 6000km, used to use mobil 1 and do it every 5000km, but after switching to Royal purple, i noticed that my oil dones burn as much, it will always stay at the full mark till 3000km.... and i got a pretty heavy foot xD plus i took it to a few auto-x's
#23
Looks like we found the cheap bimmer guy lol
With a port that's 1.25" wide by whatever tall (15 inches?, you never say), you're less than 20 sqin of port area. I would give that sub needs a bit more than that, in the range of 25-30sqin. A pair of 4" PVC ports would be a great start.
With a port that's 1.25" wide by whatever tall (15 inches?, you never say), you're less than 20 sqin of port area. I would give that sub needs a bit more than that, in the range of 25-30sqin. A pair of 4" PVC ports would be a great start.
#24
Looks like we found the cheap bimmer guy lol
With a port that's 1.25" wide by whatever tall (15 inches?, you never say), you're less than 20 sqin of port area. I would give that sub needs a bit more than that, in the range of 25-30sqin. A pair of 4" PVC ports would be a great start.
With a port that's 1.25" wide by whatever tall (15 inches?, you never say), you're less than 20 sqin of port area. I would give that sub needs a bit more than that, in the range of 25-30sqin. A pair of 4" PVC ports would be a great start.
I know this because i have a spreedsheet that shows my cars maintenance list and the mount for the parts and hours of labour if you buy all dealership parts. And labour alone is 91.4 hours for all the maintenance!!! so there is $9000 spent on labour alone.
Any thats only the e36, most v8, newer m-series and the suvs are alot more expensive to maintain.
It is the best car i have ever owned, i bought the same exact model of the car twice, because there isnt cars made like a bimmer.
#26
viper, you are right i did never say,, its 14.5 inchs
i have hooked it up and played it a bunch , there is no port noise.
bmw- i got to change the rear differencial bushings, the front upper control arm bushings,,, how much you think that will be at a stealership, i hope not more then a grand..
i have hooked it up and played it a bunch , there is no port noise.
bmw- i got to change the rear differencial bushings, the front upper control arm bushings,,, how much you think that will be at a stealership, i hope not more then a grand..
#27
My car is meant to be kept like it has just left the dealer ship, thats the reason, only the best parts are used. Why would i change OEM parts that have costed BMW millions in Research and Development for cheap copies, that can be made in chine for 20 bucks?
Btw check out bimmerforums just type it in google, n u will see the bimmer enthusiasts and honestly i spend less money than mot the members do on that forum.... like 500 buck photoshoots n rims redune everytime a scratch appears on them...
#28
viper, you are right i did never say,, its 14.5 inchs
i have hooked it up and played it a bunch , there is no port noise.
bmw- i got to change the rear differencial bushings, the front upper control arm bushings,,, how much you think that will be at a stealership, i hope not more then a grand..
i have hooked it up and played it a bunch , there is no port noise.
bmw- i got to change the rear differencial bushings, the front upper control arm bushings,,, how much you think that will be at a stealership, i hope not more then a grand..
I personally would get poly-urethene bushings and the control arm busings shouldnt be that much.
But if ur not gonna DYI then i might cost you about 600 or so for labour.
Last edited by iverson03tj; 06-27-2010 at 01:32 PM. Reason: addin info
#29
ok guys i got the LOC hooked up , everything hooked up, and it sounds just great, the box, the amp, the loc does its job great, everything is bumpin.-,, but only when the trunk is open..
i dont have fold down rear seats, and no ski pass throo either, there is simply no bass getting into the cabin. but with the trunk open its so loud. i am suprized how much sound DOESNT get threw its like, too good insulated..
i have to play it at max max volume just so i can hear it, higher then i would like to push my equipment, cuz i want this stuff to last long.
anyways, lots of smoke coming from the port of the Type X.. smells like teryaki chicken.. maybe the glue on the box was melting..
i dont have fold down rear seats, and no ski pass throo either, there is simply no bass getting into the cabin. but with the trunk open its so loud. i am suprized how much sound DOESNT get threw its like, too good insulated..
i have to play it at max max volume just so i can hear it, higher then i would like to push my equipment, cuz i want this stuff to last long.
anyways, lots of smoke coming from the port of the Type X.. smells like teryaki chicken.. maybe the glue on the box was melting..
#30
ok guys i got the LOC hooked up , everything hooked up, and it sounds just great, the box, the amp, the loc does its job great, everything is bumpin.-,, but only when the trunk is open..
i dont have fold down rear seats, and no ski pass throo either, there is simply no bass getting into the cabin. but with the trunk open its so loud. i am suprized how much sound DOESNT get threw its like, too good insulated..
i have to play it at max max volume just so i can hear it, higher then i would like to push my equipment, cuz i want this stuff to last long.
anyways, lots of smoke coming from the port of the Type X.. smells like teryaki chicken.. maybe the glue on the box was melting..
i dont have fold down rear seats, and no ski pass throo either, there is simply no bass getting into the cabin. but with the trunk open its so loud. i am suprized how much sound DOESNT get threw its like, too good insulated..
i have to play it at max max volume just so i can hear it, higher then i would like to push my equipment, cuz i want this stuff to last long.
anyways, lots of smoke coming from the port of the Type X.. smells like teryaki chicken.. maybe the glue on the box was melting..
Your trunk could be made sealed with cement and you should still hear bass in cabin.
The enclosure is lacking port and i dont think the side port is working out to well.
The smell would be voice coil, not glue melting.