understanding Minimum useable square vent dia.
#1
understanding Minimum useable square vent dia.
Trying to understand the first formula from carstereo.com 1 driver @ 6mm xMax @ 33 hertz.= for square port min. Area 10.85" and length of side 3.29" does this mean roughly a 2.25x4.75 opening at 3.29 " long? If so how can it know that without air volume?
If you want to use this calculator, first choose what size driver(s) you are using, then enter how many are in your enclosure. Now, enter your Xmax figure (in millimeters), and the frequency that you need to tune your vent to. And, finally click the "Calculate Minimum" button to get your results. The "Minimum Diameter" box is for round ports, and the "Minimum Area" box is the minimum area required for a square vent.
If you want to use this calculator, first choose what size driver(s) you are using, then enter how many are in your enclosure. Now, enter your Xmax figure (in millimeters), and the frequency that you need to tune your vent to. And, finally click the "Calculate Minimum" button to get your results. The "Minimum Diameter" box is for round ports, and the "Minimum Area" box is the minimum area required for a square vent.
Thread
Thread Starter
Forum
Replies
Last Post
d4rin
Install related
15
10-08-2010 08:23 AM
Lord Huggington
Enclosure Design & Construction Help
8
05-27-2009 03:11 PM
ChinaMan
Enclosure Design & Construction Help
5
03-09-2009 03:39 PM
KingRukus
Enclosure Design & Construction Help
4
08-27-2004 01:13 PM