2007 Ford F350 Crew Cab Build
14 Attachment(s)
First off, the pics are huge, sorry for that, hit the back button NOW if your short on bandwidth!
Someday i'll figure out how to resize them properly I said I would share my build on here when I was done....probably with never be "done" so here it is: Here's the victim: https://www.caraudioforumz.com/attac...ine=1397150501 What came out: Alpine W205, Parrot BT kit, some infinity speakers & a couple of Infinity amps. https://www.caraudioforumz.com/attac...ine=1397150501 Sub box with 12" RD Sonance: https://www.caraudioforumz.com/attac...ine=1397150501 https://www.caraudioforumz.com/attac...ine=1397150501 Something to stretch cloth over: https://www.caraudioforumz.com/attac...ine=1397150501 Sub box slid into frame: https://www.caraudioforumz.com/attac...ine=1397150501 Rear seat framed up: https://www.caraudioforumz.com/attac...ine=1397150501 |
Fiberglass & Filler
18 Attachment(s)
Stretched:
https://www.caraudioforumz.com/attac...ine=1397151434 Wetted out: https://www.caraudioforumz.com/attac...ine=1397151434 Layed up & test fit: https://www.caraudioforumz.com/attac...ine=1397151434 Home for the storage bucket: https://www.caraudioforumz.com/attac...ine=1397151434 Carnage from retrieving the bucket: https://www.caraudioforumz.com/attac...ine=1397151434 Storage bucket cut from original middle seat: https://www.caraudioforumz.com/attac...ine=1397151434 Components to be cut into console: https://www.caraudioforumz.com/attac...ine=1397151434 Layed out: https://www.caraudioforumz.com/attac...ine=1397151434 Cut in and test fitted: https://www.caraudioforumz.com/attac...ine=1397151434 |
6 Attachment(s)
Original plan was to hang the amps on sub box and mount Power distribution & Inverter under the seat:
https://www.caraudioforumz.com/attac...ine=1397152489 https://www.caraudioforumz.com/attac...ine=1397152489 This plan was abandoned once the decision was made to physically downsize the amps. Replacement amps: http://imageshack.com/a/img823/268/21fe.jpg Speakers were replaced with a couple set's of JL's going here: http://imageshack.com/a/img404/1992/kfc6.jpg Mounted on these: http://imageshack.com/a/img836/6071/guaa.jpg Tweeters later got switched out with a pair of Alpine's...the JL's could rip your eardrums out from 50'.... Reworked the under seat area to hold amps and processor plus fab'd up a mount for the rear wall to hold power distribution & Inverter: https://www.caraudioforumz.com/attac...ine=1397152489 Now that everything has a home, time to start the finishing.... |
2 Attachment(s)
sanding....filling....sanding....filling...sand... OK you get the idea:
https://www.caraudioforumz.com/attac...ine=1397152825 fab'd up a bucket to hold the switches: http://imageshack.com/a/img593/5493/7fgswitchbox.jpg http://imageshack.com/a/img838/308/switchbox.jpg Ready for Primer: https://www.caraudioforumz.com/attac...ine=1397152825 |
Sub Box Mod
2 Attachment(s)
Before Priming I decided I had to do something with the side of the box that was originally slated to have amps on it....so...
http://imageshack.com/a/img831/2165/subwindowext.jpg Played around with some LED's https://www.caraudioforumz.com/attac...ine=1397153479 |
Time to Prime
2 Attachment(s)
|
Add some colour:
4 Attachment(s)
Rear wall power distro/Inverter mount:
http://imageshack.com/a/img825/8007/cu0r.jpg Under Seat components: http://imageshack.com/a/img542/1883/ebfa.jpg Sub window panels: http://imageshack.com/a/img839/8382/l5tz.jpg Rear Rack: http://imagizer.imageshack.us/v2/640x480q90/197/nsz.JPG Main Console: https://www.caraudioforumz.com/attac...ine=1397154132 |
Prepared the Truck for Installation
Somewhere around 125' of Be-quiet:
http://imageshack.com/a/img59/9946/u65i.jpg http://imageshack.com/a/img42/7039/d2bf.jpg Rough-in the wiring: http://imageshack.com/a/img33/8654/9ir.JPG Deadened doors and made up plugs for the large openeings: http://imageshack.com/a/img839/1033/rhqz.jpg http://imageshack.com/a/img547/9538/212w.jpg Aero Tape around the openings: http://imageshack.com/a/img7/4572/yfvy.jpg Friction fit plugs and taped in. Removable for service: http://imageshack.com/a/img541/2752/ot1u.jpg Speaker Mounts: http://imageshack.com/a/img208/1166/bwet.jpg Speakers and plugs installed: http://imageshack.com/a/img802/6714/58jm.jpg Original weather shield pulled back over doors: http://imageshack.com/a/img824/1931/thj4.jpg Replaced the Am/FM antenna with a wifi antenna: http://imageshack.com/a/img40/2462/ant8.jpg |
Prepared the Truck for Installation
Double post.....
|
Looking Buff..
2 Attachment(s)
paint now needed to be buffed, I used this
https://www.caraudioforumz.com/attac...ine=1397155874 After buffing & a couple coats of Zaino's polish: http://imageshack.com/a/img801/2536/t5zq.jpg |
All times are GMT -5. The time now is 03:21 AM. |
© 2024 MH Sub I, LLC dba Internet Brands