4 channel amp question.
Thread Starter
50 Watt CAFz'r
Joined: Aug 2008
Posts: 56
4 channel amp question.
I am looking for a 4 channel amp that has a decent amount of power and have come down to a couple choices.
-Soundstream Reference 4.920
-Digital Designs DDC5b
I have no experience with either company and my last 4 channel amp was a Helix Dark Blue and felt that I needed a little more than 70-60rms @ 4ohm.
Any opinions on either of these amps or even other amps that I could consider over these two?
These will be powering, depending on how stuff goes, either a 2-way RD Alpahs comps or 3-way set of RD Elite's....just need the 4" mids to stinking show up with the X-overs.....
Thanks!
-Soundstream Reference 4.920
-Digital Designs DDC5b
I have no experience with either company and my last 4 channel amp was a Helix Dark Blue and felt that I needed a little more than 70-60rms @ 4ohm.
Any opinions on either of these amps or even other amps that I could consider over these two?
These will be powering, depending on how stuff goes, either a 2-way RD Alpahs comps or 3-way set of RD Elite's....just need the 4" mids to stinking show up with the X-overs.....
Thanks!
I have the Eclipse XA4200 on sale right now, rated at 125w rms x 4. This amp is a great amp as well. I am the only Canadian dealer with this amp at the price indicated here on the forum.
link to amp.
http://www.eclipse-web.com/us/amp/xa4200.html
link to deals.
http://www.canadiancaraudio.com/online/forbidden-audio/196748-eclipse-closeouts.html#post542535
link to amp.
http://www.eclipse-web.com/us/amp/xa4200.html
link to deals.
http://www.canadiancaraudio.com/online/forbidden-audio/196748-eclipse-closeouts.html#post542535
Last edited by MR2NR; Feb 6, 2010 at 04:44 PM.
Thread Starter
50 Watt CAFz'r
Joined: Aug 2008
Posts: 56
Another amp came up in discussion with PoundThatSound Trevor:
Exlie XI800.4
Anyone familar at all? As you can tell I have no idea what amp to look for and I'm very open to ideas but still leaning towards the Soundstream amp personally but the thing might be to large, not sure yet.
Exlie XI800.4
Anyone familar at all? As you can tell I have no idea what amp to look for and I'm very open to ideas but still leaning towards the Soundstream amp personally but the thing might be to large, not sure yet.
I'm really happy with the Xi 800.4's
it's a bit heavier built and more solid than the SS IMO
I'm running mine in two channel bridged (400w rms x 4) and crank them non stop
with no issues at all..the class a/b triple darlington design has really good output
and the sound quality is really tight and transparent...the sound floor is non existant
evn with the 1600w rms I'm pushing to my components
it's a bit heavier built and more solid than the SS IMO
I'm running mine in two channel bridged (400w rms x 4) and crank them non stop
with no issues at all..the class a/b triple darlington design has really good output
and the sound quality is really tight and transparent...the sound floor is non existant
evn with the 1600w rms I'm pushing to my components
I'm really happy with the Xi 800.4's
it's a bit heavier built and more solid than the SS IMO
I'm running mine in two channel bridged (400w rms x 4) and crank them non stop
with no issues at all..the class a/b triple darlington design has really good output
and the sound quality is really tight and transparent...the sound floor is non existant
evn with the 1600w rms I'm pushing to my components
it's a bit heavier built and more solid than the SS IMO
I'm running mine in two channel bridged (400w rms x 4) and crank them non stop
with no issues at all..the class a/b triple darlington design has really good output
and the sound quality is really tight and transparent...the sound floor is non existant
evn with the 1600w rms I'm pushing to my components
Would you like a little headroom with that order of ****, sir?.....
