95 honda civic 4 door sedan

Reply Subscribe

Thread Tools

Search this Thread

09-29-2010, 11:42 PM

jonesbrooklyn

I suck a bozzack for a nickel

Thread Starter

iTrader: (5)

Join Date: Aug 2006

Posts: 2,681

95 honda civic 4 door sedan

hey guys, anyone know how to change the deck. I have no clue how to remove the plate on it. Any help will be greatly appreciated. thanx in advance.

09-30-2010, 12:48 AM

luke99

2000 Watt CAFz'r

Join Date: May 2007

Posts: 2,141

the entire peice should pop out , the factory unit is held in with screws in the dash peice , I had a 02 and the entire dash peice just poped out and made it super easy to work on

09-30-2010, 01:06 PM

jalat

2000 Watt CAFz'r

iTrader: (6)

Join Date: Mar 2008

Posts: 2,736

like luke said, the panel that has all the heating controls and such pulls right out.

09-30-2010, 03:11 PM

johnw

500 Watt CAFz'r

iTrader: (4)

Join Date: Sep 2006

Posts: 518

Quote:

Originally Posted by jalat

like luke said, the panel that has all the heating controls and such pulls right out.

That is NOT TRUE! you will break ! Take out the panels under the deck and remove two small screws that go UP into the radio.

09-30-2010, 03:39 PM

jalat

2000 Watt CAFz'r

iTrader: (6)

Join Date: Mar 2008

Posts: 2,736

Quote:

Originally Posted by johnw

That is NOT TRUE! you will break ! Take out the panels under the deck and remove two small screws that go UP into the radio.

ahhh yes.... dont think i ever put those screws back in place once i finished the headunit install.....

09-30-2010, 04:57 PM

luke99

2000 Watt CAFz'r

Join Date: May 2007

Posts: 2,141

on my 02 and 04 civic there was no screwes holding it in place the peice that has the control buttoms just pops out then the middle peice was held in by screw wtih the stock unit

09-30-2010, 05:09 PM

johnw

500 Watt CAFz'r

iTrader: (4)

Join Date: Sep 2006

Posts: 518

Quote:

Originally Posted by luke99

on my 02 and 04 civic there was no screwes holding it in place the peice that has the control buttoms just pops out then the middle peice was held in by screw wtih the stock unit

01 and up is very different then 1995 .