I need to crimp 3 terminals and thought I might drive to somebody or a shop to crimp the terminals for me. I'm in Milton, so closest to me is Brampton, Mississauga and Oakville, let me know if you can help me out.
it's 2 4awg terminals and 1 8awg...

 

Hammer + screwdriver is your friend.

Follow it up with some solder if you are still displeased.

 

haha, yeah, would rather drive to someone with a crimper to crimp it good all around, and I'll pass on the solder

 

There really isn't much more to say, is there?

 

Vise + 1/2" alan wrench = done. it's the same thing...actually it's probably better! I would solder it anyways. SAFETY FIRST!!!!!!

 

i have one... proper crimping tool... depends if our schedules match... im winston churchill and dundas area
can crim from 20awg to 0/1

 

haha i use vice grips when im in a hurry...

 

I would say hammer or vice. I used a 20 y/o hammer the last time I needed to make terminals. Worked well.

 

hey, thx for replying on the crimper, can't pm, need 10 posts first
I'd be happy to meet you somewhere, whenever you hove some free time. I'll be free any evening starting from friday. let me know what's good for you

 

3/8" copper tubing + a vise + solder = win, on the cheap