Anyone know of any 6 or 7 channel amplifiers?
#11
And I'll add 6ch's:
Hifonics Aphrodite
Denon DCA-800
Earthquake PA-6050C
MARS H-70
Monolithic A640
PG MPH-6300 (just kidding!)
PG FAS-2555 AKA:Frank Amp'n Stein
PG FAS-2400 AKA:Son of FAS
PG Route 66
Sony XM-C6000
Sony XM-C2000
Sony XM-C1000
And 8ch:
Monolithic A816x
Hifonics Aphrodite
Denon DCA-800
Earthquake PA-6050C
MARS H-70
Monolithic A640
PG MPH-6300 (just kidding!)
PG FAS-2555 AKA:Frank Amp'n Stein
PG FAS-2400 AKA:Son of FAS
PG Route 66
Sony XM-C6000
Sony XM-C2000
Sony XM-C1000
And 8ch:
Monolithic A816x
#14
My guess is you're looking for a 7-chn for a 3-way and a sub? To be quite honest, I'd go the PLOW route and just a get a bunch of 4-chns (2 amps and get the 7chns). Hahahaha. I think I've only used all 7-channels on my davinci once. The sub channel is not exactly the most powerful. Mind you, for sq, the davinci isn't so hot either.
#15
To add:
7-8 channels...
A/D/S/ PX/a
I think Lunar had a 50x8
If you did passive modules on a 4 channel Xtant you'd get 8 I think, kinda.
6 channels...
Blade SE6100
Blade SE6175
Blade SE6250
McIntosh MC4000M
McIntosh MC440
Brax Platinum? Think this was 6
Audison LRx 6.9
Audison VRx 6.420
Audison VRx 6 Direct
There's probably tons of 6 channels we're not thinking of, the 7's and 8's are a lot rarer.
7-8 channels...
A/D/S/ PX/a
I think Lunar had a 50x8
If you did passive modules on a 4 channel Xtant you'd get 8 I think, kinda.
6 channels...
Blade SE6100
Blade SE6175
Blade SE6250
McIntosh MC4000M
McIntosh MC440
Brax Platinum? Think this was 6
Audison LRx 6.9
Audison VRx 6.420
Audison VRx 6 Direct
There's probably tons of 6 channels we're not thinking of, the 7's and 8's are a lot rarer.
#16
rockford fosgate punch 360.6
6 channels at 30wpc rms into 4 ohms
you can still find em on ebay for cheep..
I thought of getting one too. but then just added a 600a5 to my existing one...
That way I get 8 channels plus 2 sub amps
2channels for rear with passive xover
6 channels up front for 3 way active
2 200w sub amps... great for SQ...not a SPL car..
I got both for about $125US each on ebay...
6 channels at 30wpc rms into 4 ohms
you can still find em on ebay for cheep..
I thought of getting one too. but then just added a 600a5 to my existing one...
That way I get 8 channels plus 2 sub amps
2channels for rear with passive xover
6 channels up front for 3 way active
2 200w sub amps... great for SQ...not a SPL car..
I got both for about $125US each on ebay...
#17
Originally Posted by ChinaMan
My guess is you're looking for a 7-chn for a 3-way and a sub? To be quite honest, I'd go the PLOW route and just a get a bunch of 4-chns (2 amps and get the 7chns). Hahahaha. I think I've only used all 7-channels on my davinci once. The sub channel is not exactly the most powerful. Mind you, for sq, the davinci isn't so hot either.
I am considering the 2 5 channels or a few 4 channels but I would like one huge all in one amplifier for sure. I will look at what everyone has suggested, I appreciate the guys that even came up with 8 channels.
Thing is I wouldnt want less then 75watts for midrange+tweets and no less then 100 for midbase.
#18
[URL="http://cgi.ebay.ca/SOUNDSTREAM-DAVINCI-7-CHANNEL-LIMITED-EDITION_W0QQitemZ270044493262QQihZ017QQcategoryZ49 50QQrdZ1QQcmdZViewItem"]
I know you mentioned this in the original post, but have you seen this one is gold plated SOUNDSTREAM DAVINCI - 7 CHANNEL LIMITED EDITION
I know you mentioned this in the original post, but have you seen this one is gold plated SOUNDSTREAM DAVINCI - 7 CHANNEL LIMITED EDITION
Last edited by Twenty2; 10-23-2006 at 10:09 AM.
#19
Originally Posted by Twenty2
[URL="http://cgi.ebay.ca/SOUNDSTREAM-DAVINCI-7-CHANNEL-LIMITED-EDITION_W0QQitemZ270044493262QQihZ017QQcategoryZ49 50QQrdZ1QQcmdZViewItem"]
I know you mentioned this in the original post, but have you seen this one is gold plated SOUNDSTREAM DAVINCI - 7 CHANNEL LIMITED EDITION
I know you mentioned this in the original post, but have you seen this one is gold plated SOUNDSTREAM DAVINCI - 7 CHANNEL LIMITED EDITION