cda 9811 problem
08-29-2006, 10:23 AM
#1
0 Watt CAFz'r
Thread Starter
Join Date: Aug 2006
Posts: 30
cda 9811 problem
i have a 1986 mustang gt and the radio doesnt move i still wondering if i need a installation kit for this radio...? anywayz ive had this radio for a long time and maybe about 1 year ago or less the radio started skipping on certain bumps in montreal what could be the problem???
08-29-2006, 09:50 PM
#2
Originally Posted by nick27
i have a 1986 mustang gt and the radio doesnt move i still wondering if i need a installation kit for this radio...? anywayz ive had this radio for a long time and maybe about 1 year ago or less the radio started skipping on certain bumps in montreal what could be the problem???
According to Crutchfield, there is an adapter and wiring harness to fit your car....
You should be able to pick them up at a local shop....you will probably have to wait while they order them in tho.....
HTH
Last edited by BigRedGuy; 08-29-2006 at 09:55 PM.
08-30-2006, 09:44 PM
#4
Maybe....if the CD mechanism is wearing out, it is probably not worth fixing considering how much a basic deck is worth these days. If the deck itself is moving around, the installation kit would help stop that.
If you get it from a local shop and you're not sure how to put it in, they should be able to do it for around $20- $25 or so.....
HTH
If you get it from a local shop and you're not sure how to put it in, they should be able to do it for around $20- $25 or so.....
HTH
09-02-2006, 12:14 AM
#6
As you mentioned, you've had the deck for a really long time......pretty much says it right there.
If it's been working well for that long, you got your moneys worth out of it....
If it gets so bad you can't listen to it anymore, it's time to go shopping.....and get a newer one with more cool toys on it.....
If it's been working well for that long, you got your moneys worth out of it....
If it gets so bad you can't listen to it anymore, it's time to go shopping.....and get a newer one with more cool toys on it.....
09-02-2006, 09:42 AM
#7
0 Watt CAFz'r
Thread Starter
Join Date: Aug 2006
Posts: 30
well ive only had it for 2 years and this guy that i knew had the cda 9815 for more than 3 yrs and still works fine... im gonna try to open my radio and c if i could screw in the screws what is the best way..???
09-03-2006, 06:31 PM
#8
Originally Posted by nick27
well ive only had it for 2 years and this guy that i knew had the cda 9815 for more than 3 yrs and still works fine... im gonna try to open my radio and c if i could screw in the screws what is the best way..???
If you're going to open up the deck itself without knowing what you're doing you may kill it completely......if the deck mounting is solid, I would suggest you find a good shop around you that can pop the case on it, power it up on a bench, and take a look at the mechanism and see if it is still working OK....if it ejects and loads CDs OK, they may not be able to see a problem......in which case you either live with it or get a new one.
HTH
Thread
Thread Starter
Forum
Replies
Last Post
