Here is the next setup I'd like to go with - I'm wondering if I can run one driver non-inverted & the other inverted **see photo**

Ju

 

would sound weird as the air space would be different by the amount of displacement

 

Thanks MTT - I'm putting a spacer in between so they are in their individual cambers one at 1.06(inverted) and the other at 1.21(non-inverted) to compensate!

 

just get the phasing right and there should be no problems.....

 

Question is why? or why not?

just for fun?

 

Correct me if I'm wrong!

Driver 1 inverted
Coil1+2 2ohm + - Series
Coil1+2 2ohm - +

Driver 2 Non -inverted
Coil1+2 2ohm + - Series
Coil1+2 2ohm + -

Thanks MTT

 

not sure what you mean please elaborate!

 

as long as they are reversed from each other, should be fine.

what you drew confuses me, and what is the coil configuration of the subs?.....assuming they a dual 2's
look at this diagram and just reverse the speaker on the right's + and - connection where they have the wires going, so the two connectors under the "d" in the word "load".....this should yield a 2 Ohm load.
I'm a bit hazzy this morning so someone correct me if I'm wrong and please test with a DMM before hooking this to an amp.

 

Nice diagram - the only difference in my head was reversing the + & - on the inverted sub to achieve proper phasing!


Thanks MTT Julian

 

This is what I'm talking about - gotta love paint (it's no photoshop though) LOL

J