kirk tarrant

i just bought a ecplise head unit and it has wirring for facotry sterring wheel controls. i have a 2000 durango, whats involved to get this working?

[ August 06, 2005, 10:03 AM: Message edited by: kirk tarrant ]

Pioneer Guy

Check out PAC (www.pac-audio.com) & SoundGate (www.soundgate.com). Both should have units that might work but them may not be able to use the wired remote input, you may have to go infrared.
Good luck!

kirk tarrant

my head unit shouldent need on its got some sort of control built in

BigBubba

if you have the controls already on the steering wheel then what you'd need is a remote 4 from soundgate or the swi-vfrom PAC, the swi-x is for vehicles that have the AC and heater controls on the steering wheel.

pinhead

from what i understand the eclpise steering control only works on toyota
so if you want it to wark by a pac piece they are what i use

2 8's AKA Jeepbeats

iTrader: (19)

Which vehicles have AC and heater controls on the steering wheel? </font>[/QUOTE]"The SWI-X is a learning remote which allows the customer to retain the use of their steering wheel or rear seat radio controls when replacing the factory head unit. The SWI-X will interface most aftermarket stereos into most vehicles with steering wheel or rear seat audio controls. Works with virtually all aftermarket radios with wireless infrared remote capability. The SWI-X also retains the use of heater control buttons on GM vehicles. The SWI-X features just can't be beat... "

Taken from: http://www.pac-audio.com/products/swi.htm

[ August 07, 2005, 06:33 PM: Message edited by: Jeepbeats ]

BigBubba

thanks jeepbeats I was going to use the same write up lol