FIT build begins
10-21-2008, 10:20 PM
#81
I've got my blow up bed ready to go! I'll probably sleep in the shop! LOL!
I think your new ideas are just completely wild - but knowing you and from what I saw in your previous install it's going to decimate all.
Thanks for all the input and ideas! I really apprciate it!
10-21-2008, 10:21 PM
#82
10-22-2008, 02:41 PM
#83
Administrator
Join Date: Feb 2006
Posts: 16,855
Back in the day I built a Mustang with a completely removeable amp rack/sub box. I use RC Lightspeed connectors (Anderson Powerpole) for all the speaker connections. I like how they interlock so you can make a custom molex of any size you like.
10-22-2008, 06:50 PM
#84
DAY 9 BIG day
re-installed vent fan
Ran a 10gauge B+, IGN and GND - fusing not complete yet!
Trunk Grounding block - 14.52 @ Bat - 14.41 @ Trunk - not bad (thanks Fozzz)
Carpet belly installed
Rear seats/belts installed
Cut out 1/4" ply lower board
eDEAD liquid - Trunk panels, A pillar maybe more - 2nd layer tomorrow
Tomorrow re-install front seats, and all main cabin panels
enjoy!
re-installed vent fan
Ran a 10gauge B+, IGN and GND - fusing not complete yet!
Trunk Grounding block - 14.52 @ Bat - 14.41 @ Trunk - not bad (thanks Fozzz)
Carpet belly installed
Rear seats/belts installed
Cut out 1/4" ply lower board
eDEAD liquid - Trunk panels, A pillar maybe more - 2nd layer tomorrow
Tomorrow re-install front seats, and all main cabin panels
enjoy!
10-23-2008, 06:03 PM
#87
Day 10
Dynamatted the Rear hatch and used my last two sheets in the tire well and rear corners.
Applied some Liquid eDEAD to the corners on the rear!
Re-installed the glover box and center console.
Re-installed the HU - Let me tell you so much nicer with independent wires B+ IGN and GRN. The metra harness made is bulky - Not I can tuck the rca properly and clean up the wires (sorry no photos) - Battery was dead
Installed a negative switch for a relay to control the fan!
All wires have been tested for '+' & '-' (rather be certain now then later)
Tomorrow is going to be amp rack day! I have a meeting(**** on TV-WFT??) in the morn so only half a day - at least I'll be able to mount the amps (hopefully and get things moving! More photos tomorrow
Looking for Grade A fiberglass - PM me
Dynamatted the Rear hatch and used my last two sheets in the tire well and rear corners.
Applied some Liquid eDEAD to the corners on the rear!
Re-installed the glover box and center console.
Re-installed the HU - Let me tell you so much nicer with independent wires B+ IGN and GRN. The metra harness made is bulky - Not I can tuck the rca properly and clean up the wires (sorry no photos) - Battery was dead
Installed a negative switch for a relay to control the fan!
All wires have been tested for '+' & '-' (rather be certain now then later)
Tomorrow is going to be amp rack day! I have a meeting(**** on TV-WFT??) in the morn so only half a day - at least I'll be able to mount the amps (hopefully and get things moving! More photos tomorrow
Looking for Grade A fiberglass - PM me
10-23-2008, 07:24 PM
#89
I'm literally killing myself to get this done - home at 3am up at 10am leave for work around 7pm -
The sub enclosure is going to be a work of art(hopefully) - Amp rack is going to be fun tomorrow! - I wish I could do what you ding in the well but I want to keep my spare!
maybe I'll do a spare tire poll!
The sub enclosure is going to be a work of art(hopefully) - Amp rack is going to be fun tomorrow! - I wish I could do what you ding in the well but I want to keep my spare!
maybe I'll do a spare tire poll!
