Fresh install design & concepts
#1
Fresh install design & concepts
Hi and thanks for looking.
I am planning a new install in my 2004 Chevy Cavalier (4 door) and while i have a reasonable idea of what I want, I am confused about speaker loads, wiring and a couple of other things I would like to know
I would appreciate your input...
I am planning:-
Pioneer head unit,nothing fancy, DEH-6800MP or similar
Crossover - Active or passive in-line? Used RF passive in the past with good results but hear active is way better.
6 interior speakers - 4" front doors, 6 1/2" rear shelf and 2x1" tweeters in the front pillars.
1 amp (or 2 if needed) bridged to a single (or double) 10" sub in a custom box (i will build) in the trunk.
Now for all the questions!
Q1. Do i use the 4 channel outputs from the head unit to the crossover (assuming active) or the pre-amp outputs?
Q2. How do i wire 6 speakers off a 4 channel amp? Front and rear in parallel?
Q3. If parallel, does that mean i need an amp capable of 2ohm output (2x4ohm speakers in parallel).
Q4. Why does the head unit i want have 3 pre-amp output & a sub preamp output? How would i use 3 pairs of outputs + sub?
Q5. When buying the speakers, sub(s) and amp(s), how do i calculate the load and match it to the amp output?
Thanks again for reading, even more so for a reply... yes i'm a noob at this...
Cheers!
Goose
I am planning a new install in my 2004 Chevy Cavalier (4 door) and while i have a reasonable idea of what I want, I am confused about speaker loads, wiring and a couple of other things I would like to know
I would appreciate your input...
I am planning:-
Pioneer head unit,nothing fancy, DEH-6800MP or similar
Crossover - Active or passive in-line? Used RF passive in the past with good results but hear active is way better.
6 interior speakers - 4" front doors, 6 1/2" rear shelf and 2x1" tweeters in the front pillars.
1 amp (or 2 if needed) bridged to a single (or double) 10" sub in a custom box (i will build) in the trunk.
Now for all the questions!
Q1. Do i use the 4 channel outputs from the head unit to the crossover (assuming active) or the pre-amp outputs?
Q2. How do i wire 6 speakers off a 4 channel amp? Front and rear in parallel?
Q3. If parallel, does that mean i need an amp capable of 2ohm output (2x4ohm speakers in parallel).
Q4. Why does the head unit i want have 3 pre-amp output & a sub preamp output? How would i use 3 pairs of outputs + sub?
Q5. When buying the speakers, sub(s) and amp(s), how do i calculate the load and match it to the amp output?
Thanks again for reading, even more so for a reply... yes i'm a noob at this...
Cheers!
Goose
#2
Q3 -- Check the pic, theres 2 pairs of output, Front and rear, and one for the subs, subs aren't read outputs .. I'm looking into that deck also..
Check this link , it has pics of all angles, front rear or player and for most HU too..
sorry, my broswer has loading issues (on campus) so heres the link, Just search for your DEH-P6800MP @ www.sonicelectronix.com
and check out the pics.. ! even shows the all the display backgrounds
Check this link , it has pics of all angles, front rear or player and for most HU too..
sorry, my broswer has loading issues (on campus) so heres the link, Just search for your DEH-P6800MP @ www.sonicelectronix.com
and check out the pics.. ! even shows the all the display backgrounds
#3
Q3 -- Theres 2 pairs of output, Front and rear, and one for the subs, subs aren't rear outputs .. I'm looking into that deck also..
Check this link , it has pics of all angles, front rear or player and for most HU too..
sorry, my broswer has loading issues (on campus) so heres the link, Just search for your DEH-P6800MP @ www.sonicelectronix.com
and check out the pics.. ! even shows the all the display backgrounds
Check this link , it has pics of all angles, front rear or player and for most HU too..
sorry, my broswer has loading issues (on campus) so heres the link, Just search for your DEH-P6800MP @ www.sonicelectronix.com
and check out the pics.. ! even shows the all the display backgrounds
#5
Originally Posted by Goose
Q1. Do i use the 4 channel outputs from the head unit to the crossover (assuming active) or the pre-amp outputs?
http://www.crutchfieldadvisor.com/ISEO-rgbtcspd/learningcenter/car/crossovers_install.html
#8
Hear ya on the $
Nope, I working a deal out with MR2NR on a system right now... should have something in the next couple of weeks then onto my first install.
Gotta get it in before the weather dies completely.
Buying stuff? Hint... MR2NR - Legend.
Goose
Nope, I working a deal out with MR2NR on a system right now... should have something in the next couple of weeks then onto my first install.
Gotta get it in before the weather dies completely.
Buying stuff? Hint... MR2NR - Legend.
Goose
#9
GoooooSe ! Yes i know Mr2nr has approached me, I'm still trying to figure stuff out, and when i'm ready, i'm going to pm him with ideas.. seems like a very trust worthy vendor !.. What are you thinking of getting ? prices !?