Jo-Psyko

iTrader: (1)

well i dont see why it wouldnt be... more then the power rating of the amp what does it have for fuses? thats what is needed when deciding what to use for wire... is how much power needs to be able to flow through the wire... also larger wire helps to prevent things like dimming headlights....

zildjian_4

its got 4 40 amp fuses.

Jo-Psyko

iTrader: (1)

okay and i think most 4ga is rated to 150amp, you wont be drawing that at the imp you are using but it really would be a good idea to use the larger wire... just in case.... its always better safe then standing there watching your ride burn down....

zildjian_4

ok, im on the knu konceptz site now, i found a 4 ga amp install kit but they come with little fuses, like 80 or 120.

im gunna keep looking. you scared me with the whole burning down ride thing haha. i`ll check out the 1/0 kit some more, but if i can find a 4ga with a big enuf fuse i`ll do that

Jo-Psyko

iTrader: (1)

yeah you'll be fine with 4ga hahahahaa... if anything the fuse will blow... just get a 125amp inline. and you'll be fine ok

zildjian_4

haha, im tryin to get this done as the least amount of posts possible but im confused again now haha, isnt 125 way too small?wont it blow everytime i turn it on lol?i thought i need 160, give or take 10

Jo-Psyko

iTrader: (1)

youd need the full 160 if cranked at 1ohm... the 160 is the max that can go through he amp for example my last amp had an 80amp fuse in it and i ran it hard enough to over heat it and have it protect a few times... and my inline was 60amp....

the fuse protects the wire more then anything... and because you are not running the amp really hard you wont have a problem...

zildjian_4

ok, well that answers my question!!I`ll go for the 4ga kit then, with a 120 amp fuse. thanks for the help!!its very much appreciated!!cheeers!

Jo-Psyko

iTrader: (1)

no prob good luck put up some pics when its all done

zildjian_4

alrighty, its all ordered..heres what i got..
http://www.knukonceptz.com/productDetail.cfm?prodID=KFX-AK44

hopefully 12 ga speaker wire is sufficient, was hoping for 10 but whatever, and hopefully i have no problem with blowing fuses lol..cheers!