Just wondering if this would blow the subs or if this work work. im new to this

(2) Pioneer Premier 1400 Watt Subs- 400 RMS Each 4 ohm subs

(1) Kicker 1000.1 amp- # RMS Power @ 4-Ohm: 500 watts x 1 channel
# RMS Power @ 2-Ohm: 1000 watts x 1 channel

which channel would i put it on :S

the 2 ohm or 4?

 

You don't have a choice which channel to put the amp on. the Ohm rating output depends on the load (subwoofers) you present to the amp.

Are your subs DVC 4ohm or SVC 4ohm?

 

i dont no.

this might tell u???

* Sensitivity: 92 dB
* RMS Power Range : 400 Watts
* Peak Power Handling: 1400 Watts
* Impedance: Dual 4 Ohm
* Low Frequency response: 20 Hz
* High Frequency Response: 180 Hz
* Diameter: 12 Inch

Features
Power Handling

* Peak: 1400 Watts
* RMS: 400 Watts

Features

* Woofer Cone Material: Interlaced Basalt/Carbon Fiber Reinforced IMPP Cone
* Woofer Cone Design: Cone Reinforcement Arcs
* Surround: Wide Roll, Three-Layer Fiber Woven Radial
* Voice Coil: 4-Layer, Long Voice Coil
* Voice Coil: Wire Copper
* Voice Coil Bobbin: Phenol Resin Coated Glass Cloth
* Damper (Spider): Aramid Fiber
* Damper Ring: Yes
* Top Plate: Standard
* Projected Pole Yoke with Vented Pole
* Magnet Construction: Double Mass High-Power (83oz)
* Basket Design: Stamped Basket with Magnet Cover
* Gasket ABS
* Wire Terminals: Integrated Single-Sided Silver Compression Terminals

* Frequency Response: 20 Hz to 180 Hz
* Sensitivity: D4 (92dB)
* Ohm Rating: D2 (1 or 4 ohm) D4 (2 or 8 ohm)
* Recommended Enclosure: 0.85 - 1.75 Cubic Feet
* Dimensions: 327 mm x 172 mm
* Mounting Depth: 153 mm
* Accessory Grill: UD-G308
* Priced per speaker

 

You can wire that ONLY to 1ohm or 4ohm..so there's your answer. You need to wire the subs in paralell -series (google it )

 

nevermind...looks like it was answered

 

daul 4's

 

Wrong match of amp to subs. You would be better off replacing either the amp or the subs to get the proper match. Do you already have the amp and subs?

 

what about the same kind of subs but this kind of amp?

rms at 4 ohms- 375 rms x 1 ch

RMS Power @ 2 Ohm: 750W x 1
????

 

Nope. You need a amp that either makes it's maximum output at 1 or 4 ohms if you are going to keep those subs. They are good subs, we sell the Premiere versions for $110.00 + gst and shipping. Do you want me to dig up a deal on a amp for you? I would need a budget to work with.