can it be smaller than that? probably wont need all 32 inches across
|
yea of course it can be smaller.. i prefer the keep the heigh as as small possible, width can be anyhting under 32" and depth is ok by me also
|
the hight might not be too small, remember the sub itself is 15 inches, then u have wood on top and bottom
|
17x25x17 external
port will be 15.5 inchs tall and 3 inches wide. 20 inches long. so u will have to do an L shape port. thats tuned to 39hz should give u good spl and still have good bass. |
ok so how many boards do i cut and wat is the dimensions of each?
i think i got an idea.. ill try to draw up a diagram and post it here and u tell me if its right. thank you. |
http://www.uoguelph.ca/~hdave/blueprint.JPG
I need to know what size to cut the wood for peices: F, G, H, I and J and i need to know the spacing for: 1, 2, 3, 4, 5 and 9 Is everything else correct? |
number 5 is 5.5" i figured that out.
|
oh wow. i will do it up for u tomorow
|
thanks alot yuli.
|
i emailed a guy at kicker tech. support as soon as i bought the sub and he gave me these dimensions:
Box Parts (Square Prism) 1 Top, 1 Bottom: 17 x 32 in 0.75 (thick) in 1 Front, 1 Back: 15.5 x 30.5 in 0.75 (thick) in 2 Sides: 15.5 x 17 x 0.75 (thick) in Vent Parts 1 Top, 1 Bottom: 15.5 x 13.92 in 0.75 (thick) in 2 Sides: 2.25 x 13.92 x 0.75 (thick) in |
All times are GMT -5. The time now is 01:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands