I started to deaden my drive side door today, got it done in 4 hours, put everything back together and PROBLEM!

My comps (both sides) in the front cut in and out but only if i turn it way up 40-45/62 but are fine when playing at 25/62. Its weird because i only touched the drivers side and didnt even touch anything on the other side.

The amp and the group was not touched, the amp is on and working perfectly when the music cuts out...

Help guys, why the **** those this always happen during the summer when you really need your system up and running

 

I'm thinking loose connection somewhere. But even then if all you did was attack the door with some sound deadening it shouldn't of changed any wiring, how very very odd... best of luck bro!

 

only wire i touched was the wires connected to the left side midrange speaker to take the door panel off...ill try to see if there is anything wrong with it tomorrow as i am tierd now...

any other thoughts?

 

i had somthing like that once ... one of the speaker wires was grounding .... would work fine on low level volume, turn it up and it cuts out.

 

i have had that too

or

MMMMMMM Butt Connectors vs Soldering

 

Ya sounds like a speaker wire grounding out

 

fixed it was the wire touching metal of the door

 

awesome enjoy the tunes bro

 

thanks guys

 

Get some shrink wrap and close up all your solders