Where can I find specs for an 05 re xxx 12d2?

 

I can't find them anywhere.

 

www.archive.org misbehaves when I try to hit reaudio.com into the search. that is your best bet.

the best I can do is give you a winisd file for re xxx i have from somewhere, it says 2002 in the file, but its probably as close as you will get at this time. I think they were the same for the generation, maybe with minor differences. that i'd be unsure about.
Grab the file here, you can either plug it into winisd or open with notepad to get what you need.
Send big files the easy way. Files too large for email attachments? No problem!

try emailing them directly, maybe they will respond. some people on soundsolutionsaudio forum may help.

 

reaudio.com/html

 

nvm its down

 

This should be what you're looking for.

Qts=0.49
Fs=28
Pe=1600
SPL=88.95
Re=1.9
BL=17.1
Xmax=32mm
Qms=4.68
Qes=0.55
Sd=0.081
Vas=0.1233

 

Thanks.

 

Hate to bring up an old thread, but I just found out i'm lookin for the same specs as i'm debating a new box. Not overly happy with mine, thinkin about going sealed.

For the user that posted specs above....where did those come from? are you sure those were for the 2005 model?

I just came accross this link, which has info posted feb of 2005, so i'm assuming it's for the 2005 model, however specs are different then what was posted above.

http://forum.carstereos.org/product-...t-t58992.html?



Specs from the above are as follows:
XXX Series
12”
Electrical Q Value -Qes: 0.460
Mechanical Q Value -Qms: 3.290
Total Speaker Q Value -Qts: 0.404
Free Air Resonance -Fs: 21.00 Hz
Equivalent Compliance -Vas: 74 liters
One-Way, Linear Excursion -Xmax: 54 mm
Efficiency -SPL 1W/1m: 83.76 dB SPL
Effective Piston Area -Sd: 480 cm^2
DC Resistance -Re: 4.2 ohm
Nominal Impedance -Znom: Dual 2 ohm
Thermal Power Handling -Pe: 2000 W
Force Factor -Bl: 18.16

XXX Series
12”
Mounting Depth - 12.75”
Mounting Hole Diameter - 11.5”
Overall Diameter - 13”
Bolt Hole Circle - 12.25”
Motor Width -10.5”
Motor Depth - 5”
Basket Depth - 7.75”
Displacement - .24 cu. ft.
Weight - 72 lbs.

I'm not saying your wrong, just try'n to get the right info. If anyone has any info one way or another....I'd be happy to hear it.

 

those specs seem to be from the new generation, a la 06+ models.

 

05 xmax is 32, 06 is 54.

Qts=0.49
Fs=28
Pe=1600
SPL=88.95
Re=1.9
BL=17.1
Xmax=32mm
Qms=4.68
Qes=0.55
Sd=0.081
Vas=0.1233

These look ABOUT right, but I remember the f/s being 32 or 33, and the BL was 18 or 19.