Question about my 4-Channel MTX
#11
If you've got one set of rca's into the amp then set it to 2ch mode. If 2 sets then set it at 4ch mode. Like Dukk stated the mode selecter switch is only for the amount of signal entering the amp (allows you to use all four ch of the amp even if you only have one set of rca's enterign the amp).
If you're just running the one amp then upgrading the wiring under the hood (the big 3) and adding a cap will do nothing sonically for you.
What speakers are you running on the amp? I'll bet my paycheck that you've got your settings wrong somewhere (and a quick guess would be that you're using one set of rca's from your HU and it's a set that has a HP filter on it from the HU which is why you're not getting any bass).
If you're just running the one amp then upgrading the wiring under the hood (the big 3) and adding a cap will do nothing sonically for you.
What speakers are you running on the amp? I'll bet my paycheck that you've got your settings wrong somewhere (and a quick guess would be that you're using one set of rca's from your HU and it's a set that has a HP filter on it from the HU which is why you're not getting any bass).
#12
Morel Tempo 6.5 in the front, On high pass filter. Set at 80hz on the deck and close to it on the amp.
80hz for the sub low pass on the amp for the woofer and on the deck.
RCA's for the front, And for the nonfader.
I will re-check the settings tomorrow.
80hz for the sub low pass on the amp for the woofer and on the deck.
RCA's for the front, And for the nonfader.
I will re-check the settings tomorrow.
#13
if u use the deck xovers then dont use the amps xovers.. u have a L R front rca and u have L R sub out to the amp for channel 3 and 4. and if gain is half way before u hear anything well i guess thats just low power for u lol.. seems to be connected right so the rest i dont know. but take off the xovers on the amp if u run them on the deck
#14
if u use the deck xovers then dont use the amps xovers.. u have a L R front rca and u have L R sub out to the amp for channel 3 and 4. and if gain is half way before u hear anything well i guess thats just low power for u lol.. seems to be connected right so the rest i dont know. but take off the xovers on the amp if u run them on the deck
How do I disable the xovers on the amp though?
#18
if u use the deck xovers then dont use the amps xovers.. u have a L R front rca and u have L R sub out to the amp for channel 3 and 4. and if gain is half way before u hear anything well i guess thats just low power for u lol.. seems to be connected right so the rest i dont know. but take off the xovers on the amp if u run them on the deck
Last edited by d4rin; 04-04-2011 at 12:50 AM.