just how would i go about doing such things, as i have all the equipment, but no car anymore(long story short it's broken) and i was just wondering as i have seen it done, but have no idea how to do it myself, i'd just be look to hook-up my components and subs, both have their own amps etc, so i'd just have to get a signal to them through an HU or something, and then somehow get power to them, the only way i can think of is going out and buying a battery and just hooking it up, but then of course the battery will die pretty quick i would assume...
any hints tips etc?

 

Generator for the power, I spliced some cheap rca's, ran them out the out puts off the house stero, into the rcas input on the amp, I of course had bass pre outs, and mid.tweat preouts, this was a JVC-MJ900 Rolling panle.. I used a 1000w pyramid amp on 2 sony xplode 10s, that was 3 years ago, i just used a battery charger !! AHAH... Maybe several batterys and a charger? Get a heavy duty charger..

-db

 

computer power supplies. You put a 1 ohm 20 watt power resistor from the 5v wire to the ground, then connect the 12v wires to your amp.

 

seriously it's just as simple as a computer power supply? lol or a couple of them anyways, lol

 

yep! [img]smile.gif[/img]

 

i can just pick up a decent resistor at a radio shack can't i? or should i go about making my own still?

 

resistors arent exactly easy tomake... the cost of making one would be less than buying one.

 

you can get a 1ohm 300watt resistor at princess auto for 3 bucks

 

woah, i didnt know that! that's definately a good deal, as the 20 watter at radioshack is more than that..